Custom Bellhousings

warboys · Post by **warboys** » Mon May 18, 2009 9:27 am

Can anyone recommend somewhere to get a gearbox bellhousing made? I want to mate a Maserati twin turbo V8 to a Porsche G50 gearbox if at all possible.

SCOOBYUSA · Post by **SCOOBYUSA** » Mon May 18, 2009 10:00 am

adapter bye its self would be easy.. but have to work out clutch and input shaft distance and diameter.. then have to get clutch cable or hyd set up for it..

Post by **Stuart** » Mon May 18, 2009 8:24 pm

warboys wrote:Can anyone recommend somewhere to get a gearbox bellhousing made? I want to mate a Maserati twin turbo V8 to a Porsche G50 gearbox if at all possible.

That sounds like fun

Please tell me that's for the Charade :lol:

warboys · Post by **warboys** » Tue May 19, 2009 9:08 am

Please tell me that's for the Charade

I may be mad, but not that mad! The chassis wouldn't take it, it already has signs of some stress from the engine thats in it!

Its for a kit car, a Foreman Mk4 to be precise.

Honda Rush · Post by **Honda Rush** » Tue Sep 01, 2009 8:12 am

Although may be rather a late reply, If you are serious about this project then Taylors Foundry at Haverhill can do this stuff, They would digitise the engine to bellhousing bolt layout and the gearbox to bell housing mounts. You sort flywheel clutch release bearing input shaft length etc. They would then do the casting in steel ally magnesium etc, Then machine to required spec and you write the cheque out, And if you had 10 done and sell the other 9 you have yours for free. Win Win situation

warboys · Post by **warboys** » Tue Sep 01, 2009 12:46 pm

Not too late a reply at all, still on the drawing board stage at the moment. Thank you for the input, very useful indeed.

Honda Rush · Post by **Honda Rush** » Tue Sep 01, 2009 4:34 pm

I do have a contact within Taylors gladly help if i can. Five years back i nearly had a batch of 10 Honda K20 (Civic Type R) to Ford Type 9 box bell housings cast then went the Honda F20 (S2K route) so need. But still believe i could have produced a saleable product.

warboys · Post by **warboys** » Thu Sep 03, 2009 9:59 am

I am still planning my build at the moment and am actuallying thinking about a different power plant as the Maserati unit may not be the most sensible. No matter what engine I use I am definitely using the G50 box.

Honda Rush · Post by **Honda Rush** » Thu Sep 03, 2009 11:00 am

Mate is building a mid engine GT Car using the V12 ally bmw engine from some old school bmw, mated to a porsche transaxle mated up with a flat 20mm billet plate fine, He has done chassis suspension steering engine driveline and making the buck for the body at the mo. Nice engine though and cheap

Bigpower

Custom Bellhousings

Custom Bellhousings

Re: Custom Bellhousings