fitting coilovers and geometry set up

Technical discussions
Andy916
Posts: 1013
Joined: Fri Sep 29, 2006 5:56 pm
Location: Cambridge

Post by Andy916 »

The need for camber bolts depends very much on car. My 3 Imprezas have all been different. The v6 RA was worst and needed Whiteline adj arms to get decent rear camber, not just eccentric bolts. Production tolerances...

Get a pair from camskil for 25 quid just in case they're needed when doing alignment. 1.5deg all-round has worked well for me and hasn't worn the inside of the tyres unduly over loads of road miles.

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

blacky wrote:TBH mate, if your not going to track the car extra the roll centre kit is probably not worth it in your case. probably b est to save your money to spend elsewhere.

if you do want them, then Fast Eddy is your man, as he is a Whiteline dealer :D
Alyn at ASP knows the part numbers concerned and can sort them out no problems. He sorted mine out - they are not expensive and make a huge difference.

If you get the car cornering flat(ter) - you do not need much negative camber.

Post Reply