The need for camber bolts depends very much on car. My 3 Imprezas have all been different. The v6 RA was worst and needed Whiteline adj arms to get decent rear camber, not just eccentric bolts. Production tolerances...
Get a pair from camskil for 25 quid just in case they're needed when doing alignment. 1.5deg all-round has worked well for me and hasn't worn the inside of the tyres unduly over loads of road miles.
fitting coilovers and geometry set up
Alyn at ASP knows the part numbers concerned and can sort them out no problems. He sorted mine out - they are not expensive and make a huge difference.blacky wrote:TBH mate, if your not going to track the car extra the roll centre kit is probably not worth it in your case. probably b est to save your money to spend elsewhere.
if you do want them, then Fast Eddy is your man, as he is a Whiteline dealer
If you get the car cornering flat(ter) - you do not need much negative camber.