The Story of My 32 **update 2**

Show us yours....
User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

just a bit of an update, my car was at APT all day today and i had this done.

both front inner CV gaitors replaced
Torque Split Controller installed
redline heavyweight shockproof gearbox oil
clean and freed up front calipers
new rear pads
Blitz ECU Chip (i now have no speed limiter at last!!)
Rolling road diagnostics

it made 340.1bhp and 290lb/ft torque which im very happy with as i only have apexi filters and HKS Super Drager sytem and stock downpipes.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

323ian
Posts: 2518
Joined: Fri Jul 28, 2006 10:48 am
Location: Norfolk

Post by 323ian »

Great results.
Glad you finally have it all sorted out.

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

Brilliant mate, there is nothing worse than when your car doesnt work, you lose all enthusiasm in it. Glad to hear its all ok now.

Another thumbs up for the boys at APT.

Cheers for doing the write up.

Needs some pics on it though !!!!!

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

yeh i was really starting to lose it with the car but now im loving it again :D
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

kev@tga
Posts: 1158
Joined: Thu Oct 05, 2006 9:19 pm
Location: norwich

Post by kev@tga »

good figures mate, the guys down apt know there stuff :thumb:
Matt Black Wrapped 2009 GTR with litchfield stage 4.25 :thumbs:

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

Image
Image
Image
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
madenglishman
Posts: 557
Joined: Thu Jul 27, 2006 11:08 pm

Post by madenglishman »

Looking sweet John :twisted:
Dan

205 GTi....... for track and fun

V8 Jag ....... for pimping

Big power dyno shootout champion 07'

User avatar
Ben
Posts: 11608
Joined: Thu Jul 27, 2006 8:16 pm
Location: East Anglia

Post by Ben »

Great figures mate.
Dum spiro, spero
____________________________________

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

just another update

i phoned APT about my sumplug problem (the thread is stripped on the sump) they informed me that the only way to do it properly is to remove the sump which means engine out from what ive read, coupled with the fact one of my injectors is leaking and all the other problems which are:

1.an electrical problem causing it to retard the ignition randomly
2.a strange vibration when more than 30% front torque
3.steering constantly vibrates
4.when going slow the rear diff vibrates
5.multipul leaks (nothing major)
6.a scraping noise from engine on idle

this means im going to change the engine oil myself and do a temporary bodge on it to keep the car on the road.

but the big news is im going on a huge save to buy all the goodies i want for when my engine comes out aswell as getting all the other problems sorted at the same time so basically i wont be using my car very much at all for quite a while but when it does finally go in it will be coming out a new car with lots and lots of stuff done to it.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

323ian
Posts: 2518
Joined: Fri Jul 28, 2006 10:48 am
Location: Norfolk

Post by 323ian »

1.an electrical problem causing it to retard the ignition randomly = sounds like knock sensors to me being faulty and then retarding the ignition to compensate

2.a strange vibration when more than 30% front torque = could be an engine mount, or a faulty front diff

3.steering constantly vibrates = nothing major, sounds like just a lost wheel balance

4.when going slow the rear diff vibrates = you could be lucky and have an uprated diff or it could be faulty

5.multipul leaks (nothing major) = get your overalls on at get your head in that engine bay with a hand full of seals!!

6.a scraping noise from engine on idle = worn bearing, power steering pulley? alternator?


Hope this helps mate and keep the faith!!

Post Reply