Longer wheel studs

JC · Post by JC » Sun Mar 11, 2007 8:26 pm

Where's a place I can buy some locally?

Also looking for some tapered wheel nuts?

Any suggestions?

Thanks

JC

323ian · Post by **323ian** » Sun Mar 11, 2007 9:21 pm

JC have you looked at getting some good quality spacers that use the original studs to hold the spacer on and then the spacer has its own seperate studs which you bolt your wheel on to?

JC · Post by JC » Mon Mar 12, 2007 7:56 am

I really don't need to go that far, the ones that replace the studs come in at around +15mm offset, and I would sooner keep as close to stock as possible.

The front studs are slightly longer than the rears, so they will tranfer, thats the back end sorted, all I need do is find something for the front

JC

IWANT1 · Post by **IWANT1** » Mon Mar 12, 2007 5:08 pm

Mitshubishi competition wheel studs +25mm longer stnd Item number: 300089784761

check this ad out on ebay

lee

shash1 · Post by **shash1** » Mon Mar 12, 2007 6:48 pm

give westgate fastings on the gapton in yarmouth a look,they should be able to help you out

JC · Post by JC » Mon Mar 12, 2007 7:49 pm

shash1 wrote:give westgate fastings on the gapton in yarmouth a look,they should be able to help you out

Tried Westgate, was in there on Friday, great with everything else...but not car specific like wheelstuds and wheelnuts etc.

JC

JC · Post by JC » Mon Mar 12, 2007 8:15 pm

IWANT1 wrote:
Mitshubishi competition wheel studs +25mm longer stnd Item number: 300089784761
check this ad out on ebay

lee

Looks good, tried calling them but no answer... also tried SCA in Norwich today...bring it over they said, estimate a price of about 1.50 each, I also need to get a set (20) tapered wheel nuts in M12 x 1.5mm with a 17mm hex.

Good find, if SCA can't help, or are more expensive than they say then these guys look like they can supply

Thanks

JC

Post by **Stuart** » Mon Mar 12, 2007 10:19 pm

Ask for Matt or Kat and tell them that I said you should ask for a discount and then grin

Those two are well used to my bare faced cheek at knocking their prices down. Let us know how you get on.

323ian · Post by **323ian** » Mon Mar 12, 2007 10:35 pm

My wheel spacers with their own studs are 10mm.

Be warned that it could need the whole hub off the car to bang new studs in mate.
I put some in my old Mazda when i fitted Mitsi GTO brakes to it and was a right pain putting the new studs in.

stockcar · Post by **stockcar** » Tue Mar 13, 2007 8:23 am

we can normally help with this type of thing, do various gpN fitment studs and nuts, etc.......................
would imagine they are similiar spec to the EVO ones we do

Bigpower

Longer wheel studs

Longer wheel studs

Re: Longer wheel studs

Re: Longer wheel studs