TLA's

[duncan]

The whole tuning/modding world is littered with three letter ackronyns - here are a few to start the ball rolling

AFR : Air to Fuel Ratio
MAF : Mass Air Flow (how much air is going into the engine)

[Ben]

AFM : Airflow Meter
AFR : Air to Fuel Ratio
CAS : Crank Angle Sensor
MAF : Mass Air Flow (how much air is going into the engine)

[TonyB]

ACT : Air Charge Temp (See MAT)
AFM : Airflow Meter
AFR : Air to Fuel Ratio
CAS : Crank Angle Sensor
CHT : Cylinder Head Temp
EGT : Exhaust Gas Temp
MAF : Mass Air Flow (how much air is going into the engine)
MAP : Manifold Absolute Pressure (Air Pressure in the Inlet manifold)
MAT : Mass Air Temp (Temp of air in inlet Manifold)


I could do some more but I will let others have a shot :lol:

[duncan]

ACT : Air Charge Temp (See MAT)
AFM : Airflow Meter
AFR : Air to Fuel Ratio
CAS : Crank Angle Sensor
CHT : Cylinder Head Temp
EGB : Exhaust Back Pressure
EGT : Exhaust Gas Temp
MAF : Mass Air Flow (how much air is going into the engine)
MAP : Manifold Absolute Pressure (Air Pressure in the Inlet manifold)
MAT : Mass Air Temp (Temp of air in inlet Manifold)

[PhatBob]

ACT : Air Charge Temp (See MAT)
AFM : Airflow Meter
AFR : Air to Fuel Ratio
BLD : Boarderline Detonation (Point of ignition timing where first signs of detonation occur)
CAS : Crank Angle Sensor
CLT : Coolant Temp
CHT : Cylinder Head Temp
EGB : Exhaust Back Pressure
EGT : Exhaust Gas Temp
IAT : Inlet Air Temp (See MAT)
LBT : Lean for Best Torque (Leanest air fuel mix for peak torque. For Gasoline 0.86Lambda (~12.5:1 AFR))
MAF : Mass Air Flow (how much air is going into the engine)
MAP : Manifold Absolute Pressure (Air Pressure in the Inlet manifold)
MAT : Mass Air Temp (Temp of air in inlet Manifold)
MBT : Minimum Best Torque (Earliest timing point where peak torque is produced)
WOT : Wide Open Throttle