Not another one! Crazy road trip..... Only Bedford this time!

mikeb · Post by **mikeb** » Sun Feb 10, 2013 5:53 pm

Boot was rather damp haven't worked out how it's getting in yet but the n/s arch/vent area was rather full quick hole sorted that tho.

Lee it will be getting in round the rear light cluster you will see it as the water runs down the boot channel it gets in between the body and the black part of the rear light just silicone round it job done.

Cars looking very nice

IWANT1 · Post by **IWANT1** » Sun Feb 10, 2013 6:12 pm

Perfect, cheers mike.

Iam trying not to buy this, http://bbs.scoobynet.com/subaru-parts-4 ... c-kit.html

Post by **Ben** » Sun Feb 10, 2013 6:51 pm

Damn, that cage was cheap ! ...

I want this

http://www.ebay.co.uk/itm/Cusco-10Point ... ae6&_uhb=1

pjs65 · Post by **pjs65** » Sun Feb 10, 2013 7:49 pm

mikeb wrote:Boot was rather damp haven't worked out how it's getting in yet but the n/s arch/vent area was rather full quick hole sorted that tho.

Lee it will be getting in round the rear light cluster you will see it as the water runs down the boot channel it gets in between the body and the black part of the rear light just silicone round it job done.

I also noticed mine had a lot of water in the boot behind the arch so i removed a bung and it drained fairly quick . I did wonder how it got there though , a handy tip so i will check the light cluster for a leak . Pete

IWANT1 · Post by **IWANT1** » Sun Feb 10, 2013 8:23 pm

Nice cage you happy to loose the rear seat?

Mr Fletcher · Post by **Mr Fletcher** » Mon Feb 11, 2013 5:25 pm

Just make sure the sealant you use does not set so to speak so you can remove the rear clusters in the future if need be. I think mine have been sealed with windowscreen adhesive, I have tried to remove them and they are not going to come out in one piece that is for sure.

Post by **Stuart** » Mon Feb 11, 2013 6:43 pm

You could always use some square wire Jason? Saw this being used by Russ when he was taking windscreens out and he made it look so easy.......

IWANT1 · Post by **IWANT1** » Mon Feb 11, 2013 8:47 pm

Some cheap flaps turned up today, hopefully help keep some of th fen mud of the side of he car.

Quick refurb of the wheels nothing special just getting rid of the kerbing, quick rub down and masked up ready for a splash of paint.

Quick squirt of high build primer, and a dab of gold.....

IWANT1 · Post by **IWANT1** » Tue Feb 12, 2013 8:54 pm

I am rather happy with the result:D

mikeb · Post by **mikeb** » Tue Feb 12, 2013 9:10 pm

Nice job lee those rims really do suit it