new project
Update for this week so far have got the rear bumper fitted removed alot of the metal frame work which the bumper wrapped round.
Rear perspex fitted with vent holes drilled in the top and spoiler fitted to the tailgate.
Rear and front arch's now fitted.

Fitted the shifter hand brake fitted and bias valve to the side of the shifter tower

The clocks are all fitted and switch gear, wireing loom is in and facia fitted.


Put the front panel on so i could get the bonnet lined up and refit the bonnet pins.

Thats it again for now no work on it this weekend berg cup is calling.
All the best mike
Rear perspex fitted with vent holes drilled in the top and spoiler fitted to the tailgate.
Rear and front arch's now fitted.

Fitted the shifter hand brake fitted and bias valve to the side of the shifter tower

The clocks are all fitted and switch gear, wireing loom is in and facia fitted.


Put the front panel on so i could get the bonnet lined up and refit the bonnet pins.

Thats it again for now no work on it this weekend berg cup is calling.
All the best mike
life rules
Bloody great update with some nice touches. This weekend could well be very expensive for a few of us......with world class Golfs everywhere, our level of inspiration will go through the roof!
http://www.auto-genie.co.uk
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing