Sons Toyota Glanza

Technical discussions
john B
Posts: 1067
Joined: Fri Oct 20, 2006 12:53 pm
Location: Norfolk

Sons Toyota Glanza

Post by john B »

Not sure if anyone can help or suggest anything my son CHRIS B on here has just spent the last 2 days making his car slower !
Not intensionally I must add......all he has done to my knowledge is fitted a tubular manifold and decat pipe on his Toyota Glanza !
Prior to doing this it would happlily boost to .7 maybe .8 bar but since he has fitted the new manifold and decat pipe it won't boost more than .5 bar and just seems to spool up slower than before......

We have disconneted the battery etc and reconnected it to see if the ECU was restricting it but hasn't made any difference......

The actuator on the wastegate all seems to be working ok etc.....anbd there is no leaks anywhere that we can see......

Basically he has got a face like a smacked arse at the moment (I know that's normal for him most of the time anyway)

But I don't want to spend the weekend looking at it and thouight I would look to you guys for some possible suggestions !

Just one thing ! The catalyst that was fitted on the car had all the guts removed from it so was doing nothing anyway....the only difference that I can see now is the manifold ? It was a standard cast one now its a stainless tubular one......

Any help or thoughts would be appriciated.......

Or PM chris b

And tell him to cheer up....

Cheers guys

Fast Eddy
Posts: 2716
Joined: Thu Dec 14, 2006 10:07 am
Location: Norwich
Contact:

Post by Fast Eddy »

Oh the joys of modifying lol. I am sure it will get sorted. It will be a good learning exercise for him.

These cars normally respond quite well to exhaust mods. I fitted manifold and full system to ne of these a few years back and it responded well.
All i can think of is that the so called performance tubular manifold flow worse than the original cast one. It can happen if it is a cheap chinese jobby.

I would put the standard one back on as see if it reverts back to before. Also check to make sure gaskets are on correct.

Eddy
Authorised trader. Bespoke & direct fit exhaust/induction solutions, silicone hose specialist, Millers oils, Whiteline, EBC + much more. Find me at http://www.fast-eddys.biz

Image

330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

john get him to run over ill sort it for him
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

john B
Posts: 1067
Joined: Fri Oct 20, 2006 12:53 pm
Location: Norfolk

Post by john B »

Gary big thanks for looking at this it looks like might be happy again and all the lost horses and a few extras found too !
Much appreciated mate!

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

What was the issue in the end mate ?
--------------------------------------------------------------------------------
Gareth

john B
Posts: 1067
Joined: Fri Oct 20, 2006 12:53 pm
Location: Norfolk

Post by john B »

The actuater on the wastegate was faulty and leaking pressure luckily we had
replacement which Gary fitted and the car was producing a healthy ,,158bhp so smacked


arse face avoided for the rest of the weekend.

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

no probs john,glad to help out

saw him today and he looked happy any way
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

User avatar
Daniel
Posts: 4260
Joined: Sun Oct 14, 2007 6:43 pm
Location: somewhere

Post by Daniel »

Glad to hear it's all sorted John, i assume Chris has started to smile now ;)
-----------------------------------------------------------------------
If you need something shooting, or a payload to low earth orbit. Just ask. :rolleyes:

john B
Posts: 1067
Joined: Fri Oct 20, 2006 12:53 pm
Location: Norfolk

Post by john B »

Yes Dan not sure about smiling but he's not as miserable looking as normal now......!

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

john B wrote:Yes Dan not sure about smiling but he's not as miserable looking as normal now......!
Its your looks he has inherited then ;)
--------------------------------------------------------------------------------
Gareth

Post Reply