APT Saxo- The end is....... now!

Danny@APT · Post by **Danny@APT** » Wed Mar 23, 2011 8:56 pm

Well, the 'new' pistons are in the hole with the original rods and bearings, and after a small repair to some cracks forming between the waterways, the head has been skimmed to within an inch of its life and is ready to go back on.

Then these arrived today-

Can you tell what it is yet?

Rob S · Post by **Rob S** » Wed Mar 23, 2011 9:04 pm

2 Cams, headgasket and head?

Post by **Stuart** » Wed Mar 23, 2011 9:17 pm

My guess is that the large box contains instructions for me finding myself a proper car. It has been a while, after all

Danny@APT · Post by **Danny@APT** » Wed Mar 23, 2011 10:54 pm

Bet you forgot Gary's got Mod priviledges, didn't you Stu?

Rob, you're nearly there- Wafer-thin headgasket to up the compression further still, and a pair of lumpier cams.

But what's in the big box?

Tonynos · Post by **Tonynos** » Thu Mar 24, 2011 12:35 am

D4nny8oy wrote:Bet you forgot Gary's got Mod priviledges, didn't you Stu?

Rob, you're nearly there- Wafer-thin headgasket to up the compression further still, and a pair of lumpier cams.

But what's in the big box?

It must be BOOST

Rob_B · Post by **Rob_B** » Thu Mar 24, 2011 5:00 pm

a lovely pair of coconuts??

Rob S · Post by **Rob S** » Thu Mar 24, 2011 5:34 pm

Manifold?

blacky · Post by **blacky** » Thu Mar 24, 2011 5:55 pm

Throttle bodies. Oh dear, Spec creep!

Post by **Stuart** » Thu Mar 24, 2011 7:46 pm

D4nny8oy wrote:Bet you forgot Gary's got Mod priviledges, didn't you Stu?

About fucking time!!

Brilliant

Danny@APT · Post by **Danny@APT** » Thu Mar 24, 2011 9:13 pm

Tonynos wrote:It must be BOOST

Gary has categorically stressed the words "no turbo!"... if only because it limits the spending spree!

Rob_B wrote:a lovely pair of coconuts??

Nah... too much added weight.

Rob S wrote:Manifold?

Not yet.

blacky wrote:Throttle bodies. Oh dear, Spec creep!

Bingo!

No air filter either- these puppies are gonna bark!