TNTRacing - XRCosworth

Daniel · Post by **Daniel** » Sun Aug 29, 2010 7:38 pm

great to see you guys not giving up

a real credit to Big Power well done

Bart · Post by **Bart** » Sun Aug 29, 2010 8:13 pm

Daniel wrote:great to see you guys not giving up a real credit to Big Power well done

:thumbs:cheers dan, we love being a part of this club it like a
big happy family:grouphug:

here is a little video of when it came to life before we found the
hole in the block

Rob S · Post by **Rob S** » Sun Aug 29, 2010 8:21 pm

It's only sitting in the bay you realise the size of the Turbo, looking forward to seeing it in the flesh!

Tonynos · Post by **Tonynos** » Sun Aug 29, 2010 9:33 pm

Good luck guys I hope everything goes to plan for you.

Bart · Post by **Bart** » Fri Sep 03, 2010 7:33 pm

another day at the office to day

a good days work today managed to get more than i expected done with the car,

fitted the alternator and power steering belts plus front diff

on went the flywheel and clutch assembly

then fitted gearbox and gear stick

wheeled in place ready to drop car down

engine and gearbox bolted in plus rear propshaft

exhaust fitted and bolted to the turbo

95% of the engine all back together

wastegate put back on

before i left gordons i had a little play, i fitted a screemer pipe that out out just infront of the drivers door:drool5:

hope fully all going well car will be started in the morning

Daniel · Post by **Daniel** » Fri Sep 03, 2010 7:52 pm

Al you beautie

good stuff mate, team TNT has bounced back big style

You must be really proud Paul

Rob S · Post by **Rob S** » Fri Sep 03, 2010 7:57 pm

Awesome stuff- if you ever get bored I'll leave my car at yours for a week with a wad of money!
Seriously though, very well done on the hard graft!
Good luck for the weekend

russ979 · Post by **russ979** » Fri Sep 03, 2010 8:55 pm

Brilliant effort - again!:thumbs:

Post by **Stuart** » Fri Sep 03, 2010 9:03 pm

Fantastic stuff guys. Very well done indeed.

That screamer pipe looks like it will last about five minutes though; the heat will be incredible mate. Is that tough enough?

pablo · Post by **pablo** » Sat Sep 04, 2010 6:41 am

Alan has been doing a sterling job with the car over the past couple of weeks. In all the time that the car has been at Gordons I have only been over twice due to being laid up with a bad foot. Mind you in all honesty I'm sure that Alan prefers it that way, he prefers to work alone. Even when he has not been able to do anything on our car he has been doing jobs for Gordon to help him out.

That screamer pipe was something Alan decided and then just told me what he was doing. The actual sreamer pipe from the wastegate is a proper screamer pipe, stainless steel, Alan just wanted it sticking out the side of the car.

Fingers crossed for today.