new project

[Rob S]

I'll bear that in mind if I end up going down the seats route with mine. Thanks

[mikeb]

The seats are now fitted and the harnesses and the new deep dish steering wheel the one thing with the golf is the front seats are on a really stupid set up so you carn't adapted the side mounts of the seats to them so bars have to be welded in.

Tryed them flat on the floor but sat to low.

So i cut up one of my glass carrying racks for the angle.







Sorry for poor quality photos had to do them on my phone.

Bit more to do during the week then almost there

all the best mike

[Stuart]

You're making this look far too easy Mike. Git!!

[Tk]

that looks proper inside now
make me want to give my mk2 the treatment

[Stuart]

Mike
How much headroom, in inches, do you have with a crash hat on? Your method of fitting is far more straight forward than the method I had previously used.

[mikeb]

Iam not sure but i wonted to be sitting in the right position but still have about 2 1/2 inch clearence. The thing with the golf is the dash is quite high and the angle of the steering is high.

But i have removed all the underside of the sunroof and all the mechanisem and have just fixed the top part in place.

Even with the braces welded in the seat can go another couple of inches lower .

Will have a proper look tomorrow.

mike

[mikeb]

Another new part picked up for the golf today by the wife and nice they are so will be fitting these tomorrow with the new g60 top mounts.

Oh and she picked up a set for another certain mk2 ?

All the best mike

[Stuart]

Now they look pretty You bought that waxoil yet? What about the inner tubes?

[mikeb]

Got the wax oil iam going to use the inner tube which i haven't got yet but will fit it around the struts once on like a coat so it can come off for ajustment.

mike

[Tk]

mmmmm new suspension, they do look nice

i might be in trouble on the 10th