Toyota MR2

Post by **Stuart** » Sun Jun 20, 2010 6:13 pm

Dear= cost is relative but for forged 16x8 rims, no quite cheap. You could also try 300zx rims Dan

Both fit very nicely.
Easy to come by= stalk gtr and skylineowners and be prepared to wait. Some silly sods think these are worth big money. They are not.
Driftworks could be another good site to look on.

Daniel · Post by **Daniel** » Sun Jun 20, 2010 6:24 pm

I'm personally not too struck on z33 wheels, seen them on an mr2 before and they dont look right :/ that's why i'm thinking 32gtr like below

i've also just stumbled across a pair of them on ebay for

Daniel · Post by **Daniel** » Wed Jun 23, 2010 10:27 am

Here we go, i think were on a winner

Post by **maff** » Wed Jun 23, 2010 10:34 am

nice, dan, if you want to try a set at the next meet, i can bring a pair with me, so you can check for fit, looks etc...

Daniel · Post by **Daniel** » Wed Jun 23, 2010 10:39 am

Matt i am going to tear your arm off with that offer ta muchly

Post by **maff** » Wed Jun 23, 2010 10:40 am

heh, no worries!

Fast Eddy · Post by **Fast Eddy** » Wed Jun 23, 2010 10:48 am

Think you may find they will stick out a bit.

Eddy

Daniel · Post by **Daniel** » Wed Jun 23, 2010 11:01 am

thats what i thought Eddy until i saw this on wikipedia;

Fast Eddy · Post by **Fast Eddy** » Wed Jun 23, 2010 11:12 am

15mm difference in offset and 12.5 in rim width from standard.

Just cast a line up your existing wheels to the arch and your current ones ar only around 10-15mm inside the arch.

You may have to roll the arches. In fact it looks like the front has been done on that car.

Eddy

Daniel · Post by **Daniel** » Wed Jun 23, 2010 12:57 pm

thats true Eddy, they do look rolled. but we shall see at the next meet if they will work or not