Blue Book Discussion Thread

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 3:15 pm

OK, instead of posting stuff in the wrong threads (Blacky) how about we stick Qs & As referring to things like helmets, gloves, suits, etc. in here?

I'll start.

Helmet Snell 2005 is the 2010 standard with fireproof lining

Glove backs need to be two layer Nomex with wrist strap or waisting and to go over the sleeve cuff. Important bit, must conform to ISO 6940 and say it.

Overalls, Proban are OK for another year.

Safety_James · Post by **Safety_James** » Fri Feb 19, 2010 3:16 pm

Good Idea, always got it to hand should anyone need clarification on anything.

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 3:24 pm

I spoke with the lady at Hedtec who have plenty of stock of helmets both open and full face. Group buy discount numbers are 20+ so no hope there, However their postage at

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 3:31 pm

Gloves seem to be a pain to find as 'FIA' isn't necessarily good enough they need to be ISO 6940

To find them on ebay, type in the search 'gloves iso 6940' but make sure you tick the small box below that says 'Include title and description' or nothing will come up.

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 3:36 pm

Anyone into fireproof undies? I was going to get a balaclave because my helmet almost rips my ears off but now I need to get a new lid, I'll get an open face so won't have the problem.

pablo · Post by **pablo** » Fri Feb 19, 2010 4:40 pm

Gloves iso/6940
http://www.racewear.co.uk/viewproduct.a ... search.asp

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 5:17 pm

They sell the same items on ebay, same prices.

I have a couple of Hedtec helmets on order to be despatched on Tues. If anyone else wants one, to save some postage, let me know. Currently at

blacky · Post by **blacky** » Fri Feb 19, 2010 8:04 pm

I have some 8856-2000 FIa gloves that are meant to be good for international motorsport. sure these should be okay, the ISO standard is just the minium yes?

Post by **Stuart** » Fri Feb 19, 2010 8:14 pm

blacky wrote:minium yes?

Excuse me Mr F1 contractor, what the fuck does minium mean?

Good thread Gerry. Nice contribution mate.

Gerry H · Post by **Gerry H** » Fri Feb 19, 2010 8:16 pm

blacky wrote:I have some 8856-2000 FIa gloves that are meant to be good for international motorsport. sure these should be okay, the ISO standard is just the minium yes?

Take a look at page 176, Competitor Safety Section (K) ISO 6940 is the only standard mentioned.