Hello
-
- Posts: 8
- Joined: Tue Feb 16, 2010 7:40 am
Hello
Hi, I run a online mag called Stiff( yeah i know funny title, long story), and I am in the process of building a track/drift car E36. It currently is a 320 but the plan is to move up to a 2.8 with a bit of help from Julian at Garage-D then long term possibly a JZ1 engine dropped in. to cope with this looking at bolt on arches and split rims, for a 80s euro racer look. Cheers Tim
- Mr Fletcher
- Posts: 2649
- Joined: Sun Jun 10, 2007 1:34 pm
- Location: wherever i'm needed
- Contact:
Hello and welcome to bigpower
i will have more of an indepth read later:thumbs:

[SIGPIC] [/SIGPIC]
http://www.cuttersmachinerysales.co.uk
http://www.cuttersmachinerysales.co.uk
-
- Posts: 8
- Joined: Tue Feb 16, 2010 7:40 am
-
- Posts: 8
- Joined: Tue Feb 16, 2010 7:40 am
stiffmagazine wrote:Hi, cheers, yes Stuart pointed me to this site actually! so i will be having a big old read of his build!
Ah nice one

-----------------------------------------------------------------------
If you need something shooting, or a payload to low earth orbit. Just ask.
If you need something shooting, or a payload to low earth orbit. Just ask.

Welcome to the E36 subsection of Bigpower lol.
There is lots of good advice to be had on here from Stu etc.
Let me know if you need any tuning bits.
Eddy
There is lots of good advice to be had on here from Stu etc.
Let me know if you need any tuning bits.
Eddy
Authorised trader. Bespoke & direct fit exhaust/induction solutions, silicone hose specialist, Millers oils, Whiteline, EBC + much more. Find me at http://www.fast-eddys.biz

330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!

330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!