Catch tank hose

DR GREENTHUMB · Post by **DR GREENTHUMB** » Thu Nov 12, 2009 10:08 am

Morning all ! Any body know were i can get a couple of mtrs of flexable hose so i can get my catch tank fitted. I think its about 20ml i/d. Also need some caps to blank off pcv & the part that of the breather that goes into the induction side of things. Any help would be great.

Cheers , matt.

Fast Eddy · Post by **Fast Eddy** » Thu Nov 12, 2009 11:46 am

Hi Matt,

I can sort you out mate as i do quite a bit of this sort of work, if you let me know the exact size. Give me a call or pop down.

Eddy

gary@apt · Post by **gary@apt** » Thu Nov 12, 2009 12:20 pm

try walker rubber on sweet briar ind est

cheap as for hose

Fast Eddy · Post by **Fast Eddy** » Thu Nov 12, 2009 1:28 pm

Yes, but make sure it is hose suitable for oil transfer.

Eddy

gary@apt · Post by **gary@apt** » Thu Nov 12, 2009 2:01 pm

im sure walker rubber are used to selling hose for a purpose

DR GREENTHUMB · Post by **DR GREENTHUMB** » Thu Nov 12, 2009 5:30 pm

Nice one garry. Went to waker rubber & the whole lot including blanking caps etc came to less than