The loan of two 18 inch wheels for a GTR

Post by **Ben** » Thu Apr 09, 2009 2:45 pm

Need to borrow two 18 inch 5 stud alloys - they need to be able to fit over brembo's and have a deep enough off-set to avoid clipping the brakes.

These would only be used statically whilst a set of wheels are refurbed - which of you lovely people can help ?.

RX7 · Post by **RX7** » Thu Apr 09, 2009 4:35 pm

Refurbed ?!!!!?

You only had yours done recently !!!!!!!!!!

blackskygtr · Post by **blackskygtr** » Thu Apr 09, 2009 5:03 pm

I have a spare skinny!
If that will help as they fit outside the brembos.

Jay

Post by **Ben** » Thu Apr 09, 2009 5:47 pm

Jay - it doesn't - the spares aren't deep enough - the alloys I borrowed off Gary aren't deep enough .. it's a hard life have big brakes

Post by **Ben** » Thu Apr 09, 2009 5:48 pm

Gareth, I think I fancy them black ...

muppet - these are for bryan's car whilst we get them done.

blackskygtr · Post by **blackskygtr** » Thu Apr 09, 2009 6:28 pm

LOL if you are not driving it mate just turn them around Inside out if that makes sens I had to do it with mine for the same reason

Jay

DR GREENTHUMB · Post by **DR GREENTHUMB** » Thu Apr 09, 2009 7:01 pm

Hello ben. Dont know if im being stupid but if the car is going to be stattic would it not be easier to put it on axle stands ?? I also have a skinny you can borrow if needs be.

Cheers. Matt

V8_EATR · Post by **V8_EATR** » Fri Apr 10, 2009 1:30 am

I'll let Ben handle this one as I don't know if I'm allowed to leave the car on stands or not.

Post by **Ben** » Fri Apr 10, 2009 9:19 am

Jay - that's not a bad idea actually - reversing the spares ... right i've got 1 spare - bryan you've got one - so if we can get one off jay and one of matt then we're sorted - but you won't be able to drive it ...

Matt - my drive is too soft for axle stands and I don't actually have any ..

Fast Eddy · Post by **Fast Eddy** » Fri Apr 10, 2009 9:27 am

I have a spare too Ben so you can have a spare spare lol.
I also have some spacers that may help if you still have some clearance issues.

Eddy