Engine builder?

Ian200sx · Post by **Ian200sx** » Wed Aug 20, 2008 7:43 pm

I am pissed at the builder. they also have made my 200 block worth nothing as they decked it so much. Just a case of bad advice costs the customer but not the builder. :x

gary@apt · Post by **gary@apt** » Wed Aug 20, 2008 7:48 pm

you sure its not valves hitting pistons??

Ian200sx · Post by **Ian200sx** » Wed Aug 20, 2008 8:02 pm

Cars run about 100 miles without hitting them, thicker HG now so shouldn't be a issue. Been RR with current set up with dave thinking there wasn't a problem with the engine. Unless the cam belts jumped?

gary@apt · Post by **gary@apt** » Wed Aug 20, 2008 8:08 pm

no with na cars valves can be close to pistons so under revs they slightly touch if very close

warboys · Post by **warboys** » Mon Dec 08, 2008 5:06 pm

I can highly recommend either Charlie Mahoney and CTM Performance Engineering in Dagenham or John Edwards in Daventry (currently developing a 1000bhp cossie engine!).

blackskygtr · Post by **blackskygtr** » Mon Dec 08, 2008 8:33 pm

I am going back some time and poss a bit off topic but is Roland Hayes still playing with Pinto based engines?
He was a God back in the day.

Jay

Miniwilliams · Post by **Miniwilliams** » Mon Dec 08, 2008 9:41 pm

yes harvey gibbs in peterborough is very good with the cossies.

evildave · Post by **evildave** » Mon Dec 08, 2008 10:00 pm

my mate had a harvey gibbs rst engine and that was just awesome!

Bigpower

Engine builder?

Engine Builder