Looks another good job Frayz...
Are the wheel nuts aluminum?
Frayz's V7 Prodrive Edition Impreza STi - "The Bomber"
-
mike-payne
- Posts: 729
- Joined: Sat Oct 21, 2006 4:30 pm
- Contact:
Cheers guys,
Jamie, i have some DD road dyno graphs somewhere. I'll have to try and find them. On my 2ltr in 4th gear it makes 1 bar by 3300rpm and 1.5 bar by 3800rpm.
It will have a bigger exhaust housing on it for when it goes on the 2.5 block.
Jamie, i have some DD road dyno graphs somewhere. I'll have to try and find them. On my 2ltr in 4th gear it makes 1 bar by 3300rpm and 1.5 bar by 3800rpm.
It will have a bigger exhaust housing on it for when it goes on the 2.5 block.
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Yes its on full tilt by 4k mate.Jamie wrote:so this means your FP Green spools under 4000rpm or have you got a lag. Is your intake to the turbo also 3"?
And yes i have a 3" inlet.
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Grandma, what shiney nuts you have...
Heres the car as of tonight, equiped with her new set of extended RAYS lightweight lugnuts.
Heres the car as of tonight, equiped with her new set of extended RAYS lightweight lugnuts.
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Well not much has gone on recently really
The car is SORN and due to have the motor pulled. However i have one fundamental issue.... im still waiting on my new crank.
FFS its doing my head in and i have done as much as i possibly can but now im stuck and just waiting for that to arrive and i can crack straight on with the build.
Today i tried to keep up my interest in the car by welding a fitting onto my boost pipe for my new Tial 50mm BOV.
Heres a pic just to show.
Other than that its all pretty quiet at camp frayz, and im feeling pretty dispondant with it if im honest
(Please ignore the orange vac line, its just for the purpose of testing it was working until i get new vac lines.)
The car is SORN and due to have the motor pulled. However i have one fundamental issue.... im still waiting on my new crank.
FFS its doing my head in and i have done as much as i possibly can but now im stuck and just waiting for that to arrive and i can crack straight on with the build.
Today i tried to keep up my interest in the car by welding a fitting onto my boost pipe for my new Tial 50mm BOV.
Heres a pic just to show.
Other than that its all pretty quiet at camp frayz, and im feeling pretty dispondant with it if im honest
(Please ignore the orange vac line, its just for the purpose of testing it was working until i get new vac lines.)
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.