Frayz's V7 Prodrive Edition Impreza STi - "The Bomber"

Show us yours....
User avatar
ScoobieWRX
Posts: 2136
Joined: Tue Jul 31, 2007 9:42 am
Location: Northants
Contact:

Post by ScoobieWRX »

Very pretty flywheel and light as a feather no doubt. It's a shame they haven't invented see through bell housings so you can see the pretty clutch in action. Lovely :D

Nice One!! :thumb:
Buggers cancelled my op just a couple of days before it was due. Inconsiderate barstewards!! :rant:

Image

Waiting now for another execution date!!:headhack:

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Yeah looks awesome dosent it.

The complete assembly came in at 10.2kg, i'll have to see how much the stock setup weighs when that comes off.
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

Probably close to double that :thumb:

stockcar
Posts: 906
Joined: Thu Oct 26, 2006 8:39 am
Location: north east
Contact:

Post by stockcar »

frayz wrote:Lol, nice try Jase...



Its a new Exedy Hyper twin plate. It comes with 2x 6 puck cerametalic driveplates, flywheel bolts, a lightened billet flywheel and the prettiest pressure plate available lol.

Im taking the time to show you guys now as it wont ever bee seen lol :D

I put it on the scales just for fun, the complete assembly comes in a a featherweight 10.2kg :D

Image
just be sure you keep the marks aligned when you install it in the car.....................
ASPerformance
distributors for PIAA, EXE-TC, PERF. FRICTION, PAGID, FERODO RACING,
MOTUL & MILLERS OILS,
and the list goes on...............
online shop!!

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

That looks superb Frayz, almost pornographic :)

The weights of Duncan's Cusco and my Exedy twin plates are somewhere in Dunk's project thread :)
Handle every stressful situation like a dog. If you can't eat it or hump it, piss on it and walk away!

Jamie
Posts: 58
Joined: Thu Jun 05, 2008 8:32 am
Location: Austia / Tirol

Post by Jamie »

nice write up of your car and the parts are great.

have you still the original clutch till now?

greetings

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

Mine was 13.8kg and Gerry's was 15.7kg as his had gay purple paint on it so this little baby is pretty light :)

I hope that it doesnt cause too many issues with erratic idling.

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Alyn,

Indeed, well aware of that one, cheers buddy :)

Jamie,

Yes mate stock clutch till now that has covered 40K. Its taken a fair bit of punishment too.

Dunc,

Hopefully it should idle okay, i was pretty impressed with the weight.

Looking forward to using it :D
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

Didn't think there was 2kg difference in them :o and doesn't explain why my car's faster than yours :? :)
Handle every stressful situation like a dog. If you can't eat it or hump it, piss on it and walk away!

IWANT1
Posts: 2832
Joined: Fri Jul 28, 2006 9:26 pm
Location: cambridgeish

Post by IWANT1 »

Is that the comp-R Frayz?
Image
" Uh Betty you should of seen this car in Ely today!! it had stickers and stripes
all over it, and when it started up, the noise!!!, I could feel my teeth rattling!!!"

Post Reply