Horrific Images!!

Technical discussions
User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Horrific Images!!

Post by mirage »

i thought id start to do a short term fix on my arches as i cant afford to go to h-tech for a while yet as i want skirts and bumper and a few other things doing.

so i thought id just start to get rid of the small (so i thought) area of rusty metal and fiberglass it then fill it. however this is what i found.

Image
i have taken the paint back in this part to reveal good metal, so this is as far at spreads.
Image
Image
Image

im now in 2 minds as to what to do, leave it and somehow try to save up to get it to h-tech in the next few months, or stick to my original plan and tackle it on my own then go to h-tech for the full works all at once at a later date.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
Nik
Posts: 2265
Joined: Sat Oct 07, 2006 1:29 am
Location: March

Post by Nik »

HOLY SHIT!!!! That is rather bad John. Might be worth having a go yourself. Can't make it any worse :D
I may be getting older but I REFUSE to grow up :D
Image

PMJ
Posts: 15
Joined: Thu Jul 26, 2007 11:16 pm
Location: Berkshire

Post by PMJ »

I can see a japsalon wide arch kit coming to you soon..... lol
PMJ

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

yes im doing it myself, like you say it cant get much worse, if it turns out bad i will be forced to go to h-tech prematurely.

how much is the wide arch kit? :D

ill keep the thread updated with my progress, aslong as you dont all laugh it!

hehe
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
Daniel
Posts: 4260
Joined: Sun Oct 14, 2007 6:43 pm
Location: somewhere

Post by Daniel »

that's a familiar sight, my arches were like that :-D

yeah how much is a wide arch kit? 8)
-----------------------------------------------------------------------
If you need something shooting, or a payload to low earth orbit. Just ask. :rolleyes:

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

OMG mate !!!!
That really is bad.

Are these fronts or rears ? Surely getting a 2ndhang front wing might be cheaper, might look bad but at least they'll be rust free until you have enough to get them resprayed ? Am sure the wide arch brigade probably have some they can sell cheap enough.

Personally I'd wait and get Chris at H-Tech to do it. Would be worth giving him a ring, he might be able to do something short term for you.
--------------------------------------------------------------------------------
Gareth

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

no its just the rears, everywhere else on the car is rust free, it looks like the car has had a rear end prang and had a very bad repair job done on the rear arches whihc has let rust in.

id rather not pay to have them done twice at h-tech, so ill carry on and see what i can do. im not going to go crazy on them it will only need to last a max of 4 months, then ill have enough to get everythng i want done at h-tech and have a kit to go on.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

a few hundred lung fulls of dust and a lot of cuts later and im done for the night.

ill have a grinder to use tomorrow :twisted:

Image
Image
Image
Image
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

Looks a good job mate, at least doing it yourself will save some money.

Sounds like your car will be quite something with the mods you are planning.
--------------------------------------------------------------------------------
Gareth

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

hope so, the engine work is done for this year, ill get new turbos and fuel system next year, just going to get bodywork done a kit and some handling stuff this year.

im just hoping i havnt forgotten too much from when i used to work with bodywork.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

Post Reply