Turbo Choices for ScoobieWRX

duncan · Post by **duncan** » Tue Jun 24, 2008 7:23 pm

ScoobieWRX wrote:No wideband yet and i'm just going on what my logs are telling me, but it drives really welll, very smooth and pulls well.

I remember what you said about the O2 Sensor and AFR via the ECU not being accurate. The wideband is still on my shopping list

Seriously though the narrow band reading is hopelessly inaccurate.

ScoobieWRX · Post by **ScoobieWRX** » Tue Jun 24, 2008 7:25 pm

I might just be up for that if the price is right and it's good kit.

I take it that includes the sensor, cables, double connector adaptor and meter (or will that be a little box that plugs into your PC via USB and some dedicated software instead of a meter?) :thumb:

I must get a wideband!!! I hear what you're saying Duncan, and it is at the top of my list

Gerry H · Post by **Gerry H** » Tue Jun 24, 2008 7:31 pm

It's the display that's packed up on mine. Waiting for some micro torx drivers to get the thing apart, then decide what to do.

duncan · Post by **duncan** » Tue Jun 24, 2008 7:33 pm

ScoobieWRX wrote:I might just be up for that if the price is right and it's good kit.

I take it that includes the sensor, cables, double connector adaptor and meter (or will that be a little box that plugs into your PC via USB and some dedicated software instead of a meter?) :thumb:

I must get a wideband!!! I hear what you're saying Duncan, and it is at the top of my list

the Innovate LC-1 will do the job perfectly and you can log it alongside all the other parameters too.

ScoobieWRX · Post by **ScoobieWRX** » Tue Jun 24, 2008 7:37 pm

No worries, let me know how you get on. :thumb:

In the meantime i am going to source some prices for the whole thing. I'll get prices for with display only and for laptop connect only.

See what comes up

duncan · Post by **duncan** » Tue Jun 24, 2008 7:40 pm

ScoobieWRX · Post by **ScoobieWRX** » Tue Jun 24, 2008 7:52 pm

duncan · Post by **duncan** » Tue Jun 24, 2008 7:54 pm

cheaper than a rebuild

I dont know why you have resisted for so long bearing in mind it could have potentially saved the last engine.

Andy916 · Post by **Andy916** » Tue Jun 24, 2008 8:17 pm

dynamix wrote: the Innovate LC-1 will do the job perfectly and you can log it alongside all the other parameters too.

I'd like to get one of those too, probably with 52mm gauge but also feeding into fc-datalogit box for logging along with everything else from Apexi PFC. Up until recently I had a pal in the states who sent various things over for me, but no longer unfortunately. Zak perhaps... (can anyone get Zak on the phone these days?!)

cheers
Andy

Andy916 · Post by **Andy916** » Tue Jun 24, 2008 8:25 pm

Gerry H wrote: Nice to see you're back Andy

Good to be back. Been a mad few weeks, with Lucy selling her house and moving in, plus weekends away for mountainbike racing!