Fitting Race seats in an Impreza

Technical discussions
User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

Have to say, you're dead right Trev, you should be spending it on an ecu. It'll do more good :D

Although decent seats will help you go faster. Tricky one really.
Handle every stressful situation like a dog. If you can't eat it or hump it, piss on it and walk away!

User avatar
Mr Fletcher
Posts: 2649
Joined: Sun Jun 10, 2007 1:34 pm
Location: wherever i'm needed
Contact:

Post by Mr Fletcher »

just need to check that they are the kevlar ones as the diolen ones are

Tk
Posts: 4624
Joined: Fri Oct 20, 2006 3:50 pm
Location: vorsprung durch technik

Post by Tk »

what appeals to me is that they already have the seat rails made aswell as the side mounts so no messing about just bolt in, i will ask if there kevlar but i doubt they are
Small one's are more juicy

stockcar
Posts: 906
Joined: Thu Oct 26, 2006 8:39 am
Location: north east
Contact:

Post by stockcar »

would personally never bolt a seat through the floor, particuarly in an impreza made out of tin..............

aside from anything else in an accident involving the floor it will potentially allow the seat to move and slacken/tighten race belts!!! not nice either way

on a sideways note we are main dealers for Cobra, Recaro, etc..........
ASPerformance
distributors for PIAA, EXE-TC, PERF. FRICTION, PAGID, FERODO RACING,
MOTUL & MILLERS OILS,
and the list goes on...............
online shop!!

Rustybin
Posts: 11
Joined: Thu Feb 21, 2008 5:34 pm
Location: Bucks

Post by Rustybin »

Tk wrote:what appeals to me is that they already have the seat rails made aswell as the side mounts so no messing about just bolt in, i will ask if there kevlar but i doubt they are

Looking at the pics in his add, I cant see how they mount to the existing transmission tunnel mounting. Are they new age specific I wonder?

Rustybin
Posts: 11
Joined: Thu Feb 21, 2008 5:34 pm
Location: Bucks

Post by Rustybin »

stockcar wrote:would personally never bolt a seat through the floor, particuarly in an impreza made out of tin..............

aside from anything else in an accident involving the floor it will potentially allow the seat to move and slacken/tighten race belts!!! not nice either way

on a sideways note we are main dealers for Cobra, Recaro, etc..........
Having spent a little time recently knealing in the footwell and watching it flex and creak I am coming round to your way of thinking. Back to the drawing board for plan G we go!

Tk
Posts: 4624
Joined: Fri Oct 20, 2006 3:50 pm
Location: vorsprung durch technik

Post by Tk »

got a pm back from him after sorting out a time to go and see them to say there sold, never mind, so my moneys going towards a ecu which i should have done anyway, i think the cobra evolutions are what i will go for in the future though they seem pretty resonably priced oh and extra wide :-D
Small one's are more juicy

Post Reply