rob that "R" must be costing you a small fortune mate !!
will be nice to see what the power output is when all done ..
Up dated again
-
- Posts: 111
- Joined: Fri Dec 07, 2007 7:18 pm
- Location: norfolk
- Contact:
-
- Posts: 673
- Joined: Sat Aug 11, 2007 12:08 am
ValoSunnyGti wrote:i think this is infact my favorite pulsar
pure beauty.
Does it have any rust at all ?
All 15 year old cars have rust somewhere or other but I try my best to keep on top of it, I'm just about to have two new chassis rails fitted next week more to do with captive nut problems than rust, But it is the fact that rust has weakened the welds that has made them come free of their mountings.
I will also have to have a new sill on the passenger side because the previous owner managed to bend it somehow or other :? , I'll have both sills repainted at the same time
Good maintenance and vigilance is the key as always
Rob
-
- Posts: 673
- Joined: Sat Aug 11, 2007 12:08 am
ValoSunnyGti wrote:what speeds do you think you will be getting on 1/4 mile?
I don't plan on doing to much drag racing to be honest, Would be nice to make it into the 11'sthough. The fastest the car has done so far is 12.3 for the 1/4 mile with a 1.6 second 60ft time, But that was a few years ago now when I was running 311 bhp and a standard turbo.
357 bhp is just a starting point as it's only running one bar at the moment, The turbo hasn't even started to get going at those levels lol.
I plan to do another 500 miles or so with a couple more oil changes then stick some good quality oil in it, Then I'll take it back to Wallace and see how close we can get to 2 bar and 500 bhp.
Rob
Nice one Rob,
Glad all is going to plan.
Youe car is very tidy. Credit to you mate. As you say preventative maintenance etc is the key.
Any feedback on the front diff yet?
Eddy
Glad all is going to plan.
Youe car is very tidy. Credit to you mate. As you say preventative maintenance etc is the key.
Any feedback on the front diff yet?
Eddy
Authorised trader. Bespoke & direct fit exhaust/induction solutions, silicone hose specialist, Millers oils, Whiteline, EBC + much more. Find me at http://www.fast-eddys.biz

330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!

330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!
NOW you are talking - 2 bar rocks :lol:vpulsar wrote:ValoSunnyGti wrote:what speeds do you think you will be getting on 1/4 mile?
I don't plan on doing to much drag racing to be honest, Would be nice to make it into the 11'sthough. The fastest the car has done so far is 12.3 for the 1/4 mile with a 1.6 second 60ft time, But that was a few years ago now when I was running 311 bhp and a standard turbo.
357 bhp is just a starting point as it's only running one bar at the moment, The turbo hasn't even started to get going at those levels lol.
I plan to do another 500 miles or so with a couple more oil changes then stick some good quality oil in it, Then I'll take it back to Wallace and see how close we can get to 2 bar and 500 bhp.
Rob
Got to be good for 500 or thereabouts :thumb: