lets hope so
thought i'd let you know
Carbon sideskirts and splitter. *Updated*
OK finally got around to fitting the splitter on the car aswell now, i hope i have won around all the people that were not to sure when i first put the canards on and i hope this brings the whole package together.
First job putting the splitter on was to reinforce my original Nismo bumper so it does not get damaged by either the extra downforce or more than likely getting caught on the road by the lower splitter so i made a set of brackets up for it, i also did this when i put the skirts on.
I then measured all where the original splitter bolts on and cut through the new carbon splitter so it will allow me to take apart the bumper without unbolting too many things! I am glad i did this now as to get to some of the bolts to put the carbon splitter on i had to have 3 spanners taped together with a nut taped in one end!
Here is a few pictures of it all on the car, i would like to hear some feedback again as to what you all think?
I am planning to get some better pictures done in time wink wink Ben!
A massive thanks goes out to woody on here who has helped bring my ideas to life.
I have put his details on this thread;
http://www.bigpower.co.uk/forum/viewtopic.php?t=5676
First job putting the splitter on was to reinforce my original Nismo bumper so it does not get damaged by either the extra downforce or more than likely getting caught on the road by the lower splitter so i made a set of brackets up for it, i also did this when i put the skirts on.
I then measured all where the original splitter bolts on and cut through the new carbon splitter so it will allow me to take apart the bumper without unbolting too many things! I am glad i did this now as to get to some of the bolts to put the carbon splitter on i had to have 3 spanners taped together with a nut taped in one end!
Here is a few pictures of it all on the car, i would like to hear some feedback again as to what you all think?
I am planning to get some better pictures done in time wink wink Ben!
A massive thanks goes out to woody on here who has helped bring my ideas to life.
I have put his details on this thread;
http://www.bigpower.co.uk/forum/viewtopic.php?t=5676
Runner Up Top Japanese Car 2007
-
mike-payne
- Posts: 729
- Joined: Sat Oct 21, 2006 4:30 pm
- Contact:
Nice job Ian,
It all matches nicely now. Just mind those ankles on the edges
It all matches nicely now. Just mind those ankles on the edges
Authorised trader. Bespoke & direct fit exhaust/induction solutions, silicone hose specialist, Millers oils, Whiteline, EBC + much more. Find me at http://www.fast-eddys.biz
330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!
330hp Pulsar Gti-r, 153hp Metro and 185hp Smart Car!
Nice work Ian!