Looking good Frayz 8)
Question regarding the brakes:
How many miles have you done on the new brakes? As it takes circa 200-300 to bed them in, and DS2500's need to also be bedded in properly and taken thro a few heat cycles before they work properly. On my old 4 pots once bedded in and I made them smoke once they were pukka, and managed a whole lap of the ring without much grumbling.
I am not saying they are the best pads ever, but they certainly are a good compromise between road and track pads.
It doesn't quite ring true that they would fade on the road, especially running 6 pot AP's :? :?
Frayz's V7 Prodrive Edition Impreza STi - "The Bomber"
Frayz,
The brakes,engine work and coilovers are going to make your car awesome. Well Done
And good work with the rear diff guard looks much better now.
The brakes,engine work and coilovers are going to make your car awesome. Well Done
And good work with the rear diff guard looks much better now.

BP's Roving Reporter

Aug 17-19 Jim Beam 400 V8 SuperCar Championship Oran Park, Sydney
Oct 04-07 Bathurst 1000 The Mountain V8 SuperCars
Oct 21st Indy 300 Goldcoast Surfers Paradise Champ Cars
Feb 17 Daytona 500 Nascar, Florida
Cheers guys,
Just done a bit more on the diff guard, looking even better now. Yeah Dunc, i know Zak will use it to jack on, as long as the rear bit stays nice
Blacky, Zak bedded them in but whilst out mapping we had 2 or so 130mph to 20mph stops and they hated it.
Got some DS3000s on the way now anyway.
FMIC after the coilovers then hopefully have teh engine outthis winter for a few changes
Just done a bit more on the diff guard, looking even better now. Yeah Dunc, i know Zak will use it to jack on, as long as the rear bit stays nice

Blacky, Zak bedded them in but whilst out mapping we had 2 or so 130mph to 20mph stops and they hated it.
Got some DS3000s on the way now anyway.
FMIC after the coilovers then hopefully have teh engine outthis winter for a few changes

Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Once again appologies for the dirty car but i got this on this evening and im well pleased with the result.
Enjoy


Enjoy



Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Ha ha , still got Brembos on the rear matedynamix wrote:Class 8)
Those Brembo stickers will have to go

Dont worry i'll get some AP Racing ones as replacements

Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.