Where to get methonol for a water meth kit??

Technical discussions
User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

martin wrote: If you want something to spray onto an intercooler you want to get some of the stuf plumbers use to freeze water in the pipes so they can then cut and cap the pipe. I will be getting some for the next pod run ill give my intercooler a good spray of it just befor i run should be nice and cold charge temps then 8)
Isn't that CO2? Hope you plant a couple of trees for each run :-D

sdminus
Posts: 517
Joined: Fri Jul 28, 2006 6:01 am
Location: Norwich
Contact:

Post by sdminus »

It is defo Co2. I used to run a spray bar. But i pulled it a long time ago. The bert place for water or meth is in the engine by far. Lots of people that are scared or know little about this. But its the way to a safer more powerful motor
"You think you have a limit, As soon you touch this limit, something happens to you; suddenly you can go a little bit further. With your mind power, your determination, your instinct and your experience as well, you can fly very high."

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

I agree with you on that scott - I have looked into the cyro kit for my top mount but to be honest it is throwing good money to try and fix a problems that would be solved by a front mount. Water/Meth Inj would make it even better if mapped for it too :D

sdminus
Posts: 517
Joined: Fri Jul 28, 2006 6:01 am
Location: Norwich
Contact:

Post by sdminus »

:D Coming from the rx7 driver who see's 10 deg below ambiant in summer LOL and ice on the manifold in winter LOL LOL
"You think you have a limit, As soon you touch this limit, something happens to you; suddenly you can go a little bit further. With your mind power, your determination, your instinct and your experience as well, you can fly very high."

dee_rz
Posts: 352
Joined: Tue Aug 08, 2006 1:32 pm
Location: suffolk

Post by dee_rz »

Do you think i should just use water and forget the meth to the mix?? whats your honests thoughts i only want to use for cooling, i will do some data logging with and without it running and look to make it a fair test as possible by doing the test on a day with the temps being the same and go for the same run etc.

sdminus
Posts: 517
Joined: Fri Jul 28, 2006 6:01 am
Location: Norwich
Contact:

Post by sdminus »

I would stick to water tbh. The cost of methanol is quite steep. Also you need a licence to store and sell it. ITs hard to get hold of these days.
Methanol will damage your intercooler core. It will attack aluminum. ITs is also very flamable.
As i said if you decide to use meth call me and i will sort you a price.

Scott
"You think you have a limit, As soon you touch this limit, something happens to you; suddenly you can go a little bit further. With your mind power, your determination, your instinct and your experience as well, you can fly very high."

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

sdminus wrote:I would stick to water tbh. The cost of methanol is quite steep. Also you need a licence to store and sell it. ITs hard to get hold of these days.
Methanol will damage your intercooler core. It will attack aluminum. ITs is also very flamable.
As i said if you decide to use meth call me and i will sort you a price.

Scott
I've just had a 25L drum delivered. :o

dee_rz
Posts: 352
Joined: Tue Aug 08, 2006 1:32 pm
Location: suffolk

Post by dee_rz »

Thanks for your honest opinions scott :grin: 8) will let you know if i need any if i decide to use meth.

Post Reply