FAO Everybody going to Snetterton tomorrow.

Captain Talk & Major Discussion hang out here
Dan@PFC
Posts: 49
Joined: Mon Jan 15, 2007 4:30 pm

FAO Everybody going to Snetterton tomorrow.

Post by Dan@PFC »

Hi Everyone,

Dan here from Performance Friction Brakes,

Just in case you didnt know,i'm coming down to the trackday tomorrow to offer help/advice to anyone who would like it in regards to their braking systems.

I'm also going to bring the temperature gun down, and if you would like to know what temperature your brakes are reaching round Snetterton, then just come and say hi, and we'll have a look for you. :thumb:

I can also record results, and post them up here.

Look forward to meeting everyone tomorrow.

Dan.

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

be interesting to see what temps of my rears are getting too!!!

they turn blue in no time
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

Dan@PFC
Posts: 49
Joined: Mon Jan 15, 2007 4:30 pm

Post by Dan@PFC »

Hi Gary, look forward to meeting with you tomorrow.

We'll have a good look at them!

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

what pads do you reckon for heavy trackday use??

i got 362mm ap's on front and std brembo rears?
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

Dan - you already gonna get that gun firing at my PF gear :D

Be very interested to see what range of temps they come in at.

Jakester
Posts: 39
Joined: Tue Jan 09, 2007 7:15 pm
Location: Nr Lincoln

Post by Jakester »

Don't forget the bits for my Tent dan :).

Oh and last time I was at Snett my brakes were well, on fire quite nicely, so, I would assume that f'ing hot would have been the term used on that day :), I shall try not to light them up this time :)

Dan@PFC
Posts: 49
Joined: Mon Jan 15, 2007 4:30 pm

Post by Dan@PFC »

Gary, we do an 01 compound that is specific for track use (not really advisable for the road), that particular compound offers high initial bite (once warm)and no torque rise, and can handle massive temperatures no problem...they do wear quicker than the Z Rate ones (.11 /.10) we reccomend for the fastroad/occasional trackday, but this is to only be expected with a dedicated race compound, Stuart may be interested in this aswell actually for his skyline (looking at the amount of trackdays he does).

Duncan, looking forward to seeing our products in action on your impreza, you'll certainly notice the differance to your stock oem set-up.
Will be good to get some readings from them also.

Jake, got the tent all ready for you buddy!......lets see the brakes on fire again tomorrow! :D

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Hey Dan..

Will you be running any group buys or discount to BP members.

Sorry if this has already been asked, but i'll be looking at the setup that Duncan has just bought to replace my TAR:OX's in the near future.

Cheers

Frayz

Dan@PFC
Posts: 49
Joined: Mon Jan 15, 2007 4:30 pm

Post by Dan@PFC »

Its something that could certainly be organised for sure.

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Cool.. Hopefully we can have a chat tomorrow then :D

Post Reply