Lets talk about setups 8)
What aftermarket suspension components are you using and what caster, camber, toe are you running?
suspension setups
St Bosoe coilovers
Nismo upper and lower arms
Cusco adjustable tension rods
Tomei triangulated upper front strut brace
I'll dig out the geometry settings tomorrow.
Nismo upper and lower arms
Cusco adjustable tension rods
Tomei triangulated upper front strut brace
I'll dig out the geometry settings tomorrow.
http://www.auto-genie.co.uk
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing
I changed my set up for Eibach pro springs - lowered the car by about 1 - 2", increased the handling capabilities by quite a lot, not so much roll in the corners but didn't look for any cc plates as I don't think I need them on the pony :-D

Driving a fast Jap import is like coming out of the closet, you might surprise some people, but in the end you are still gay.
www.ragingbullracing.co.uk
-
- Posts: 22
- Joined: Fri Aug 11, 2006 8:16 pm
- Location: Norwich UK
- Contact:
Front setup:
Tyres 235/45/17
Toe - Zero
Camber - 1deg negative
2 x Spax shocks, fully adjustable
Brakes - Jag XJS 4 pot calipers EBC Greenstuff
Discs - Jag XJS soon to be drilled and slotted, etc as they look cool :twisted:
Rear setup:
255/45/17
Toe - 20' toe in
Camber - 1/2deg negative
4 x Spax shocks fully adjustable
Brakes - Jag XJS 2 pot calipers in-board EBC Greenstuff
Discs - Jag XJS Standard discs cant see them so no need to replace them
Soon to replace all 6 shocks for Gaz
Phil
Tyres 235/45/17
Toe - Zero
Camber - 1deg negative
2 x Spax shocks, fully adjustable
Brakes - Jag XJS 4 pot calipers EBC Greenstuff
Discs - Jag XJS soon to be drilled and slotted, etc as they look cool :twisted:
Rear setup:
255/45/17
Toe - 20' toe in
Camber - 1/2deg negative
4 x Spax shocks fully adjustable
Brakes - Jag XJS 2 pot calipers in-board EBC Greenstuff
Discs - Jag XJS Standard discs cant see them so no need to replace them
Soon to replace all 6 shocks for Gaz
Phil
TVR 5.0L Powered Cobra Replica
MSnS-Extra (EFI)
http://www.replica-cobra.co.uk
http://www.extraefi.co.uk for Megasquirt's
MSnS-Extra (EFI)
http://www.replica-cobra.co.uk
http://www.extraefi.co.uk for Megasquirt's
17x8, 225,45 front @32 PSI
17x9, 255,40 rear @32 PSI
Mazdaspeed front strut brace
Standard rear strut brace
Standard anti-roll bars
TEIN Super Street suspension, 16 click damper adjustment and height adjustable, set to hardest damper setting which is really nice
Using the Long Track set-up from Pettit Racing in the US.

Cheers,
Alex
17x9, 255,40 rear @32 PSI
Mazdaspeed front strut brace
Standard rear strut brace
Standard anti-roll bars
TEIN Super Street suspension, 16 click damper adjustment and height adjustable, set to hardest damper setting which is really nice

Using the Long Track set-up from Pettit Racing in the US.

Cheers,
Alex
Alex.. If you want a good set up speak to MAX ( reworks). He has a good set up on his car. He is a ring regular. He will tell you what settings he runs. I need to adjust mine with the change from normal bushes to rose jointed and 16" to 17" wheels.
Scott
Scott
"You think you have a limit, As soon you touch this limit, something happens to you; suddenly you can go a little bit further. With your mind power, your determination, your instinct and your experience as well, you can fly very high."