Bigpower Mason's (mates helping mates)

blacky · Post by **blacky** » Sun Aug 06, 2006 3:23 pm

I work in F1 as a Composite Design engineer so can get carbon bits made, and also have good contacts with some very nice machine shops that can make lots of shiny bits

boxy · Post by **boxy** » Sun Aug 06, 2006 3:56 pm

blacky

Hi mate noticed you said you can make carbon bits, I`m looking to make a roof mounted carbon Fiber switch console, recon you could make one for us if I make a template for you? Obviously pay you the going rate.

Cheers Boxy

blacky · Post by **blacky** » Sun Aug 06, 2006 5:50 pm

Yes that should be no problem

, I take it, its a flat panel with cutouts for the switches etc?

boxy · Post by **boxy** » Sun Aug 06, 2006 6:43 pm

well if I send you a template then you can let me know what you think, not really flat.

moose · Post by **moose** » Sun Aug 06, 2006 7:21 pm

I can install wooden flooring, Ive never installed it in a car, but theres always a first :-D Joking aside I am installing a floor for someone in exchange for supply and fit of a new ecu.

I can get you a megasquirt ecu supplied and fitted reasonably.

I can get snap on and craftsmans tools.

Im a bit of a japaholic and can get most jap-oriented things, and can translate/speak some jap for instructions etc.

Thanks
Bruce

Post by **Ben** » Mon Aug 07, 2006 6:38 am

Bruce,

What sort of stuff from US airbases? .... I'm after an F15 ? ..

Next time we meet can you have a go at translating a piece of script that I found in my car.

moose · Post by **moose** » Wed Aug 09, 2006 6:50 pm

nothing as exciting as an f15 im afraid, prob best to ignore that offer as I probably shouldnt have advertised that.

I'll have a look at the script next time we meet, I had a load of car parking tickets in my last skyline.

sdminus · Post by **sdminus** » Wed Aug 09, 2006 9:30 pm

Mega squirt.......................... ahha. I have questions.

can you get hold of them. i only need it as a piggy back but fully mapable system to run my next project. i basically need a PWM stlye output.

Scott

shooter · Post by **shooter** » Thu Aug 10, 2006 7:46 am

I've got over 10 yrs in the motor trade behind me, mainly bodywork. Had most of my tools nicked a few years back but have replaced some. More than happy to offer assistance when possible.

moose · Post by **moose** » Fri Aug 11, 2006 1:41 pm

with regard to the megasquirt, probably best we put you in touch with Philip - http://www.extraefi.co.uk. He builds MS kits, and he co-wrote the software with another guy in the USA. He fitted a MS to my Baleno (which probably isnt quite worth putting on this site....yet) and you can see it in action if you want sometime, there are 8 guage spaces on screen for over 60 ish guages, depending on your setup (turbo/na/maf/map etc).

He has MSd many cars around Norwich, and built his replica cobra, currently with a 5.0v8 in it. Maybe we should see if he wants to sign up to the site, im sure he could look at doing a deal or two.

Danielle