Forge Universal blow off valve for non MAF sensor cars

R32 GTR Door Cards
Good condition, not faded ripped or rippled.


Bride S-Type Super Seat Rail - Drivers Side.
Arse on the floor type so seat very low, still on sliders so seat goes back and forward. R32 fitment but think will fit 33 and 34, poss z and others. Pic is passenger but I only have drivers available.

R32 GTR Ally Catch Tank
From my GTR, fits front offside as in 2nd pic and is thus shaped but dimensions are 90mm wide (at widest point), 230mm long and 180mm high.


Custom Ally Catch Tank
This was made to fit the battery tray area in my zed. H180mm, Length and Depth 200mm. Has 4 connection at the front, 2 on the top (on which I had K&N little filters), plus a tell tale on the front to see ho wfull it is and a drain plug too.

Setrab 15 row oil cooler
Again off the GTR but will fit anything. Core size is 125mm high, 135mm wide and 47mm thick. VGC, no stone holes etc as not on car long and sat behind i/c.


I also have the following:
Z32 PAS pump with Ally pulley
Z32 Viscos Fan
Z32 Ported Polished heads with high lift cams, ported manifolds, HKS turbo elbows and ally pulleys
Err, think thats it although I believe i have more GTR interior stuff.
Oh, and a 65mm auto meter boost guage
oh, and a tomei fuel pump
........
Cheers