Floating Discs

Technical discussions
Post Reply
User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Floating Discs

Post by mirage »

do floating discs usually rattle around when going over bumps?

cheers
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

they do when they as worn as yours!!
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

User avatar
mirage
Posts: 510
Joined: Wed Aug 09, 2006 7:07 pm
Location: Watton

Post by mirage »

ah yeh i see now, the disc is too thin to make contact with the pad when the pedal isnt pushed down, so nothing stopping it rattling about on the bell.
R34 Nur Engine
Tomei manifolds
Endless 6 Pots
Nismo Z-Tune Plenum
PFC
GT2860's
etc.......

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

All sounds a bit iffy :eek:

gary@apt
Posts: 1527
Joined: Thu Jul 27, 2006 7:04 pm
Location: norwich
Contact:

Post by gary@apt »

no the discs are thin cause they worn out

the noise is something different

the alloy bell move against a steel disc so after a long time of moving it wears therefore making more of a gap

new ones wouldnt make as much noise
Image
EVO 7 with 2300cc,GT35,HKS 272's,1000cc,MOTEC...the list goes on..

Post Reply