Page 1 of 1
Filthiest !!
Posted: Sat Jul 29, 2006 7:52 am
by RX7
Thought I'd add a couple of pics of an awesome looking rotary
Has the 3 things that are on my wish list:
99 spec spoiler
99 spec bumper
Scoot bonnet
Posted: Sat Jul 29, 2006 9:09 am
by Evo
Now that looks 8)
Posted: Sat Jul 29, 2006 7:43 pm
by boxy
Very mean, I like it. Is it true about the engine needing rebuilding every 60,000 miles or something?
Posted: Sat Jul 29, 2006 8:31 pm
by Stuart
Even if it were, the rebuilds are relative peanuts Terry.
RB26 rebuild =
Posted: Sat Jul 29, 2006 8:44 pm
by boxy
oh fair one, thought it would be rediculous amount on the old winkler engine.
Posted: Sat Jul 29, 2006 11:02 pm
by sdminus
Also a 400whp rotary is good for a 10 sec 1/4 mile.
Scott
Posted: Sat Jul 29, 2006 11:05 pm
by Stuart
Out of interest Scott, how much would a 400whp engine cost? and if that 1/4 mile time is true, why have you only done a 12.4 with your 350whp one
(Sorry mate, couldn't resist)
Posted: Sat Jul 29, 2006 11:26 pm
by sdminus
LOL. I know of a guy who ran a 10.90 @ 120 mph with 400whp. 350 is good for mid 11's howeva i have a huge problem with diffs. I have managed to wreck one every 8 runs. I am on my 3rd. Thats why i have gone for the kaaz 1.5 locker. should be bomb proof.
If you went from a stock car like gmogles or alex then you would need a few quid.
new fuel system inc pump says 2x 850cc primaries 2x 1680cc secondaries 280 lph pump, reg, rail etc
street port or extended port engine. could do it yourself for
Posted: Sat Jul 29, 2006 11:45 pm
by Stuart
Sounds fantastic. Nice to see you have the balls to back it all up mate. Fair play. If you need a passenger/ballast let me know, although I suspect I'll be in a queue.
(Sorry mate, couldn't resist)