high spec s13
Posted: Mon Jun 09, 2008 5:17 pm
High spec s13
--------------------------------------------------------------------------------
Right, been mulling this over for a while and the time has come,
I've got to sell her, Im not in a massive hurry so I aint gonna be taking stupid offers on it. If people dont Agree and think Im pricing it too high then please dont bother posting.
Right now for some pics and spec.
Engine mods
Full APT built engine (ONLY 1500 MILES )
ACL 84mm Forged Pistons
B&M Short Shifter
Blitz Nur Spec R
Braided Water and Oil Lines
Cusco Catch Can
Exedy 5 Puck Paddle Clutch
Greddy R-SPL FMIC
GT28RS @ 19.5psi
MOcal Oil Filter Reloaction Kit and Oil Cooler
Nismo 600cc injectors
Omex 600 ECU
Pipercross Cone Filter
Ported and Polished head
Samco Boost Hoses
Samco Rad Hoses
Sard R2D2 BOV
SE Lightened, Balanced Crank
SR20 throttle body
SS tubular manifold
Trust Forged Con Rods
Yashio Factory Dump Pipe
Wheels/Tyres
UK spec 300ZX wheels
16x7.5 front 16x8.5 Rear
225/50/16 Dunlop SP2000 Fronts
245/45/16 Toyo T1R Rears
Chassis and Brakes
300zx Front Calipers
300zx Rear Calipers and Discs
300zx BMC
Apex Rear Strut Brace
Apex 310mm Front Disc Conversion
Cusco Alu Front Strut Brace
Cusco BMC Stopper
Cusco Toe Arms
Driftworks SS Steering Bush
Driftworks Rear Subframe Bushes
Nismo Steering Rack Mounts
Nismo Front Power Brace 2
Nismo Engine and Gearbox Mounts
SPL Parts Rear Camber arms
Tein Flex Coilovers
Whiteline ARB's front and rear
Unknown Adj Front Tension arms
Interior
Blitz SBC-ID 3 D1 Edition
Blitz Power ID D1 Edition
Cobra Daytona Front Seats
Greddy Turbo and Oil Pressure guages
Greddy EGT Guage
Greddy Turbo Timer
Greddy Twin A-pillar Pod
Momo Pedals
Momo Gear Knob
Pivot Shift Light
Sparco 4 Point Harnesses
Tein EDFC
I.C.E.
Boschmann 6.5" Components
Kenwood 200w Amp
Kenwood 6x9 Subs
MB Quart 6x4 rears
Pioneer Headunit and 6 Disc Changer
Exterior
H-Dev HID kit
GP Sports Top Spoiler
Ganador Aero Mirrors
Late Jap Spec Head Lights
Late Spec Jap Side Repeaters
SE WRX Rear spoiler
Sideskirts
Rear Valance
there are a couple of small issues with it, like some dick decided to chip the paint on the boot and it has just decided to burn through a boost hose, but if it gets sold as a whole then I'll sort the pipe and Ive got the paint to sort the chip, its only taxed till the end of june, but I'll retax it if its still here then and its only just been MOT'd (2 weeks ago), it only got one advisory for a noisy wheel bearing.
Please bear in mind that the engine alone cost me AT LEAST
--------------------------------------------------------------------------------
Right, been mulling this over for a while and the time has come,
I've got to sell her, Im not in a massive hurry so I aint gonna be taking stupid offers on it. If people dont Agree and think Im pricing it too high then please dont bother posting.
Right now for some pics and spec.
Engine mods
Full APT built engine (ONLY 1500 MILES )
ACL 84mm Forged Pistons
B&M Short Shifter
Blitz Nur Spec R
Braided Water and Oil Lines
Cusco Catch Can
Exedy 5 Puck Paddle Clutch
Greddy R-SPL FMIC
GT28RS @ 19.5psi
MOcal Oil Filter Reloaction Kit and Oil Cooler
Nismo 600cc injectors
Omex 600 ECU
Pipercross Cone Filter
Ported and Polished head
Samco Boost Hoses
Samco Rad Hoses
Sard R2D2 BOV
SE Lightened, Balanced Crank
SR20 throttle body
SS tubular manifold
Trust Forged Con Rods
Yashio Factory Dump Pipe
Wheels/Tyres
UK spec 300ZX wheels
16x7.5 front 16x8.5 Rear
225/50/16 Dunlop SP2000 Fronts
245/45/16 Toyo T1R Rears
Chassis and Brakes
300zx Front Calipers
300zx Rear Calipers and Discs
300zx BMC
Apex Rear Strut Brace
Apex 310mm Front Disc Conversion
Cusco Alu Front Strut Brace
Cusco BMC Stopper
Cusco Toe Arms
Driftworks SS Steering Bush
Driftworks Rear Subframe Bushes
Nismo Steering Rack Mounts
Nismo Front Power Brace 2
Nismo Engine and Gearbox Mounts
SPL Parts Rear Camber arms
Tein Flex Coilovers
Whiteline ARB's front and rear
Unknown Adj Front Tension arms
Interior
Blitz SBC-ID 3 D1 Edition
Blitz Power ID D1 Edition
Cobra Daytona Front Seats
Greddy Turbo and Oil Pressure guages
Greddy EGT Guage
Greddy Turbo Timer
Greddy Twin A-pillar Pod
Momo Pedals
Momo Gear Knob
Pivot Shift Light
Sparco 4 Point Harnesses
Tein EDFC
I.C.E.
Boschmann 6.5" Components
Kenwood 200w Amp
Kenwood 6x9 Subs
MB Quart 6x4 rears
Pioneer Headunit and 6 Disc Changer
Exterior
H-Dev HID kit
GP Sports Top Spoiler
Ganador Aero Mirrors
Late Jap Spec Head Lights
Late Spec Jap Side Repeaters
SE WRX Rear spoiler
Sideskirts
Rear Valance
there are a couple of small issues with it, like some dick decided to chip the paint on the boot and it has just decided to burn through a boost hose, but if it gets sold as a whole then I'll sort the pipe and Ive got the paint to sort the chip, its only taxed till the end of june, but I'll retax it if its still here then and its only just been MOT'd (2 weeks ago), it only got one advisory for a noisy wheel bearing.
Please bear in mind that the engine alone cost me AT LEAST