448 BHP Prodrive Subaru Impreza Ebay again!!!!!!

IWANT1 · Post by **IWANT1** » Tue Aug 14, 2007 9:54 am

Another nice bit of kit

448 BHP Prodrive Subaru Impreza - Hill Climb Track Day Item number: 170139622806

http://cgi.ebay.co.uk/448-BHP-Prodrive- ... dZViewItem

ESL · Post by **ESL** » Tue Aug 14, 2007 10:41 am

6 pots, a 6 speeder and a cage are all good, suspension only half way there (not coilovered) but he doesn't mention uprated engine internals. If it is a standard lump its on borrowed time if his output is true. His buy it now price (13k) is optimistic IMHO.

Gerry H · Post by **Gerry H** » Tue Aug 14, 2007 11:55 am

ESL wrote:6 pots, a 6 speeder and a cage are all good, suspension only half way there (not coilovered) but he doesn't mention uprated engine internals. If it is a standard lump its on borrowed time if his output is true. His buy it now price (13k) is optimistic IMHO.

Exactly what I was thinking.

It does have some nice touches though. The re-location of the ABS, allowing the intake filter to sit in a decent position for a cold air feed. Door cards are nice. Swirl pot is something I must do. and it's a UK car. Another

ESL · Post by **ESL** » Tue Aug 14, 2007 2:12 pm

13+20=33k! Thats the price of a good car

Gerry H · Post by **Gerry H** » Tue Aug 14, 2007 2:21 pm

But it's not a 13K car atm. Another 20K and it would be a good car

ESL · Post by **ESL** » Tue Aug 14, 2007 2:25 pm

Your logic is disarming Mr Houghton. 8)

Gerry H · Post by **Gerry H** » Tue Aug 14, 2007 2:29 pm

stockcar · Post by **stockcar** » Tue Aug 14, 2007 6:08 pm

seems a little mismatched in places spec wise.................. no way i would run a car like that on an FSE reg, could be problems later

ESL · Post by **ESL** » Tue Aug 14, 2007 7:37 pm

They not all rising rate though are they Alyn?

Thanks for your help btw, that board now in a track car. A sorting you out a nice shiny new one

stockcar · Post by **stockcar** » Thu Aug 16, 2007 7:23 am

no worries Andy

no they aren't all rising rate and for more 'normal' use we haven't had any issues but certainly wouldn't be using one at anywhere near the level that car is supposed to be (there is a newer version that has only been out 6months or so, but not had a chance to try one yet)