Bigpower

Hi Guys,

I am desperately in need of a turbo support bracket to be fabricated.

The standard bracket, that I have, is correct except the leg needs extending. Being cast I can not just have an extension welded on so I need a new bracket fabbing. This should not be too difficult and I can provide the current bracket with details of the change needed.

Do you know of anyone that can do this type of work? Please please please ask around for me as I need this before I can turn the boost up and finish the mapping.

Many thanks in advance.

Cheers,

Tony

Hi Tony,

If you have a details sheet, i can make you a stainless one

Hi Lloyd,

That would be greatly appreciated, and stainless is a bonus

I do not have a detail sheet, I would not know where to start with the angles and stuff. I would need to post the bracket to copy as a base.

I will take a pic in a bit and post it up for you to get an idea of what is involved.

Cheers,

In this first pic you can see the bolt holes that I need extending. The holes need to be 15-20mm further to the left.



A few more pics for a clear picture of the job needed.





Are you able to help with this Lloyd?

Seems preety straight forward, if you can post it out to me i will get it sorted :-D

what a star

Thanks for the PM Lloyd, you are indeed a Star indeed, I may make it to a race event this year after all

I will get it posted today.

No problem at all,do you need it for this weekend?

This weekend would be a bonus, but it is no big issue if causes you a problem...

It has been sent. With a sketch (haha to my standard). I have included my contact details. Done on not give me a ring on Sunday and we will meet up.

Cheers,

as soon as it arrives, i will crack on with it.Will try and get it back to you for the weekend so that you can fit it and drive up :-D