Page 1 of 1
Fuel pressure reg help
Posted: Sat Oct 06, 2012 7:12 am
by RX7
Guys,
I have one of the Fuelab FPRs and am installing it now.
Do you recommend putting teflon tape on the fittings for the gauge and also the vacuum pipe adapter ?
Cheers,
Gareth
Posted: Sun Oct 07, 2012 7:16 pm
by dom187
Looking at mine (not to say its right!) it looks like teflon tape has been used on the FPR.
Also looking at the fuel rail the same has been done on there...
Sorry not the best pictures I just quickly ran out with my phone, you're always welcome to pop over and have a look at mine.
Posted: Sun Oct 07, 2012 7:45 pm
by Stuart
Can't see the teflon tape but I can see the straw!!
Only in Norfolk
Posted: Sun Oct 07, 2012 8:47 pm
by RX7
Thanks Dom, yep looks like I'll need some of that then. The secondary rail I have comes with some nice washers to seal it properly so will try without there first but cheers.
Thanks for the pics mate.
Posted: Tue Oct 09, 2012 7:12 pm
by stockcar
only ever use a drop of thread sealant personally.......