Bigpower

I get asked many questions about oil so I thought a thread here for all oil related questions would be a good idea and build into a FAQ or reference point for others.

So, put your oil questions here but please give the following information if you would like a recommendation:

Make
Model
Year
Engine size/type

Any mods

Type of use (road/track)

Additional info (max oil temps, current oil used)

What do you want a recommendation for? Engine, Gearbox etc?

I hope this will help and become a useful thread

Regards
Guy

Hi guys

Anyone need a recommendation?

I'll start then, normally buy my oil from you but I'll be interested to see if any others are recommended.

Make- Mazda
Model- RX7 FD3S
Year- 1993
Engine size/type - 13B REW Twin Turbo

Any mods-
uprated SMIC
4*850 injectors
Boost controller (boost upped to 0.9)
Apexi ecu
Dump valve

Type of use-
Road (plus occasional trackday)

Engine oil, gearbox oil, diff oil etc

Me too, but info on gearbox would be useful

Make- Honda
Model- EK9 Civic type R
Year- 1998
Engine size/type - 1.6 B16B

Mods:
Cold Air Intake
Stainless Steel Exhaust Manifold
ECU (raised rev limit to 9300 rpm)
70mm Throttle Body
Low Temp Thermostat & Fan Switch

Type of use:
Road & Trackday

Recommendations:
Engine oil (currently use Silkolene Pro S 5W40)
Gearbox oil

Cheers,
Alex

I have a question for you Guy

Are you going to pay to advertise on here or just post surreptitiously in a bid to procure sales through the back door?

Hope I haven't ostracized you there old chap, but rules are rules.

Stuart

Head of Diplomacy

RX7 wrote:I'll start then, normally buy my oil from you but I'll be interested to see if any others are recommended.

Make- Mazda
Model- RX7 FD3S
Year- 1993
Engine size/type - 13B REW Twin Turbo

Any mods-
uprated SMIC
4*850 injectors
Boost controller (boost upped to 0.9)
Apexi ecu
Dump valve

Type of use-
Road (plus occasional trackday)

Engine oil, gearbox oil, diff oil etc

For the gearbox and diff we recomend the Silkolene Syn5 75w-90, this has been well proven in both road and track FD's

For the engine there is plemnty of choice, many use a 10w-40 semi synthetic and with regular changes this is fine, however for modded and track used rotaries we tend to recomend an ester based 5w-40 synthetic such as the Silkolene Pro S 5w-40.

Cheers

Guy.

alexb wrote:Me too, but info on gearbox would be useful

Make- Honda
Model- EK9 Civic type R
Year- 1998
Engine size/type - 1.6 B16B

Mods:
Cold Air Intake
Stainless Steel Exhaust Manifold
ECU (raised rev limit to 9300 rpm)
70mm Throttle Body
Low Temp Thermostat & Fan Switch

Type of use:
Road & Trackday

Recommendations:
Engine oil (currently use Silkolene Pro S 5W40)
Gearbox oil

Cheers,
Alex

Alex,

You cannot go wrong with the SIlkolene Pro S 5w-40 so if you are happy with it, stick with it.

For the gearbox you will need an MTF, we have found the Redline MTL and the Amsoil Synthetic MTF have given best results.

Cheers

Guy.

stuart wrote:I have a question for you Guy

Are you going to pay to advertise on here or just post surreptitiously in a bid to procure sales through the back door?

Hope I haven't ostracized you there old chap, but rules are rules.

Stuart

Head of Diplomacy

Always keen to help a club, what are my options?

Cheers

Guy.

I understood that Dunk had PM'd you our advertising options, if not, please let me know and I'll run through it with you

Thanks Guy

Stuart