Page 1 of 1

roll cage tubing

Posted: Thu Oct 11, 2007 5:52 pm
by Mr Fletcher
does anybody know what the specification of the tubing used in roll cages and what are the regulations regarding

building your own cage ie if you wish to use it for competion does it need some form of type approval .

i was only going to use it for track days at the moment but just thought would ask the question .


cheers


jason

Posted: Thu Oct 11, 2007 6:01 pm
by Stuart
Jason

I'll lend you my MSA blue book. Some useful stuff in there.

Posted: Thu Oct 11, 2007 6:05 pm
by Mr Fletcher
many thanks, will be an interesting read


cheers


jason

Posted: Thu Oct 11, 2007 6:16 pm
by Stuart
sidewaysfletch wrote:many thanks, will be an interesting read
cheers
jason
It won't mate, it is seriously dull. Handy though. You could always PM RPS13 (Rob) on here as he knows a thing or two about it.

Posted: Thu Oct 11, 2007 6:21 pm
by martin
This may be of some use to you
:D

http://www.msauk.org/uploadedfiles/msa_ ... 20Crit.pdf


diagrams are at end

Posted: Thu Oct 11, 2007 6:39 pm
by 323ian
I am also going to build my own for the S12 mate so if you find a very cheap supplier for tubing let me know please.

Posted: Thu Oct 11, 2007 6:40 pm
by 323ian
What you doing for bending the pipe, you got a pipe bender?

Posted: Thu Oct 11, 2007 7:32 pm
by Mr Fletcher
i have no pipe bender as yet as i don't know what i have to bend and i will also be looking into

some form of pipe notcher to enable me to cut some neat joins to weld .

cheers


jason