Bigpower

Posted: **Sun Jul 29, 2007 7:57 pm**

Does any one know the regs for a timing board, size, height anything that i need to know ???

lee

Posted: **Mon Jul 30, 2007 10:52 am**

The Beam Breaker must be mounted vertically, on the front of the car, so that it's leading edge is the furthest forward point. It must be of solid material (ie metal or wood) and matt black. It must be 51mm wide, 254mm high with 200mm ground clearance.
It must be in place when presenting the car for scrutineering.

after a bit of searching i found this does it sound correst some of you sprinting boys should know!

Posted: **Mon Jul 30, 2007 10:54 am**

Thats spot on mate

Posted: **Sun Aug 05, 2007 4:03 pm**

Knocked this up, done the trick.

Posted: **Sun Aug 05, 2007 9:38 pm**

Hi Lee, not trying to be pedantic but it's referred to as a timing strut.

Posted: **Sun Aug 05, 2007 9:48 pm**

I know that now fella :thumb:

Posted: **Mon Aug 06, 2007 6:39 am**

Looks like they may be changing the regs on the timing struts and making them longer to 270mm.....doh!

Bigpower

Timing Strut

Timing Strut