Bigpower

just fited new gearbox did 30 miles turned off went back 10 mins later now 4x4 light stays on :!: :!: any clues :?:

Hi Ben,
Have you tried the obvious. Oil levels, sensor plugs, fuses etc?
Was that gearbox from Birmingham ok then. Did RK check it?
Eddy

No will check all monday!! yes got the box from birm all ok with it had a look ourselvs and its what it says on the tin thanks for asking.

Fast Eddy
If your going to the dyno day pop in and pick up the clutch i am in costessey

There's a diagnostics light on the 4x4 ecu under the rear parcel shelf.

It should flash when there's a fault, count the flashes. According to the gtr forums, these are the meanings of the codes:

Here are the trouble codes for an R32 ATTESA ECU

1

If you've got that list of fault codes .. do you happen to have the ECU fault codes .. I used to have them but can't find them for love for money now ...

I used the above codes for finding fault on a friends R32 which ended up only as low fluid level.

Ben, these are the fault codes I have for the R32 gtr ECU, I have various other documentation on the car largely in one pdf. I can email it over to you if you like.

ECU Diagnostic Codes

11 Crankshaft position sensor
12 MAF sensor circuit
13 Coolant temperature circuit
14 Vehicle speed sensor circuit
21 Ignition circuit
31 ECU
34 Knock sensor
43 Throttle position circuit
45 Injector leak
51 Ignition circuit
54 Auto signal to ECU
55 All OK

How many meg is it ? ....

Thanks chaps prob was fluid levels silly me :oops: . although those codes are well useful top man

Hi Charles,
You seem a handy guy to know,
Is your manual different to the one published on here.
Can you mail it to me anyway please.
Thanks
Eddy
Are we going to see you at a meet?