The Integra...

Show us yours....
Post Reply
User avatar
Safety_James
Posts: 1295
Joined: Sat Mar 17, 2007 11:58 am
Location: Snetterton Circuit - Track Safety
Contact:

The Integra...

Post by Safety_James »

Well ive had her for just over 2 months now so i thought i would put up a thread to outline my plans for her... :driving:

Here's a picture to start with..

Image

Luckily as some of you may know i bought this car off my boss and it was his second DC2 owned from new and has had no expense spared on her since day one and i will continue to do the same.

The overall aim is to have a fast road/track set up that is both comfortable and useful for my 40mile daily round trip to work but can also be unleashed on the circuit should i want to :D

Atethe moment the car is totally standard apart from the HID kit i fitted a while back but after alot of research on American/Australian and UK forums and conversations with wise people, (the big Stu being one of them) my initial modifications list has completely changed for the better.

Ive just recently had a full service, so oil and fluids are all spot on and on monday evening coming i will have her up on the ramp at work to be waxoyled and checked over.

The next parts to be fitted that i already have will be:

A subtle mongoose exhaust system, de-cat and a comptech (ceramic) 4-2-1 manifold off a chap who races in the nippon challenge and has used them for 3 races before pulling out. I had almost finalised a purchase on a mugen twin loop, but countless noise problems with the system put me off.

Set of Skunk2 lowering springs, might possibly sell these on again and get some D2 coilovers, not sure yet, might try one track outing on these and see how they feel.

Brake master cylinder stopper & some lightweight wheel nuts (thanks to Stu for getting them from Japshow today for me :coolgleamA:)

Wheels :- Honda made it with 15" wheels for a reason, so i dont intend to ruin the handling by bunging 18" obscenities on it. I already have the wheels, the stock ones, and all i intend to do is get them re-painted black with a red lip, like the rota time attack wheels. (See example below of UK DC2 alloys with the said paint scheme) Saves valuble money that can be spent elsewhere on more useful items but i think will look great.

Image

Shopping List So Far:

Mugen/Spoon Panel Filter (Going to leave the OEM induction box as is)
Solid Shifter Bushings
Hard Race Bushes
New engine mounts
Braided brake lines
Whiteline ARB's
New Thicker Cored Radiator
Set of Brembo disks and a decent street/track set of pads
Oil cooler fitting kit (have the cooler thanks to AdrianP:hurray:)
Oil pressure & temp gauges (Not the standard gauges but a digital display that replaces the clock on the dashboard so it doesnt look messy)
Fit some multipoint harnesses



On a final note, ive never owned a car that i have had such enjoyment from as it stands.. Hopefully with these subtle tweeks it can only improve, and when my level of driving does it should be quite a track car!!
インテグラ TYPE R 無限

Image

User avatar
Daniel
Posts: 4260
Joined: Sun Oct 14, 2007 6:43 pm
Location: somewhere

Post by Daniel »

Sounds like youve got yourself alot of plans there James :piggy: cant wait to see it all come togther in one neat package :D
-----------------------------------------------------------------------
If you need something shooting, or a payload to low earth orbit. Just ask. :rolleyes:

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

Looks awesome mate, dont forget a Spoon engine damper as its supposed to be worth doing also.

They are great cars, still wonder about getting one.
--------------------------------------------------------------------------------
Gareth

User avatar
RobCallow
Posts: 1668
Joined: Sun Oct 01, 2006 8:11 pm
Location: Deepest Darkest Norfolk

Post by RobCallow »

I still say my Teg was the best car I owned only thing that let it down was the lack of torque - but loved every minute of owning mine. :D
Rob

User avatar
Safety_James
Posts: 1295
Joined: Sat Mar 17, 2007 11:58 am
Location: Snetterton Circuit - Track Safety
Contact:

Post by Safety_James »

Thanks for the comments guys, the aim is to get most of the above sorted for early next year.

Spoon engine damper, what are the benifits of those, not to sure what they do?
インテグラ TYPE R 無限

Image

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

James_s wrote:Spoon engine damper, what are the benifits of those, not to sure what they do?
From what I read it helps keep the engine more stable when shifting gears and stops it rocking back and forward as much but there is a lot more info on itr-dc2 forum which I see you are on.
--------------------------------------------------------------------------------
Gareth

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

Lovely car and a sensible shopping list :)

Good luck with it.

User avatar
Safety_James
Posts: 1295
Joined: Sat Mar 17, 2007 11:58 am
Location: Snetterton Circuit - Track Safety
Contact:

Little update...

Post by Safety_James »

My exhaust arrived earlier during the week :D, and with a little help from the F2 mechanics and a lunch break we had it on nice and quickly.

Having been previously mandrel bent to sit snug under the car along the oem gap it was a perfect fit. Its not over the top, its not silly loud and is bareable on the way to work so overall im really pleased with it and Vtec does sound brilliant with it. - (Not bad for half the price of a new one and having been on previous owners race car for one event)

Image

Image

This afternoon i fitted a cusco style master cylinder stopper to give the brakes a better feel.

Usually under braking the bulkhead/master cylinder flex, installing this device prevents any movement thus allowing smoother and more precise braking, less pedal travel is required. Pound for pound this has got to be the best modification so far, it was evident there was a vast improvement from just reversing off my drive so will give it a better test at work tommorrow. (Its literally a custom made bracket with a bolt that rests agains the cylinder)

Image

Springs and thicker radiator to be fitted next week... !!
インテグラ TYPE R 無限

Image

User avatar
Rob_B
Posts: 949
Joined: Tue May 22, 2007 2:01 pm

Post by Rob_B »

nice looking exhaust james, and nice little spoon socks too...lol

User avatar
Safety_James
Posts: 1295
Joined: Sat Mar 17, 2007 11:58 am
Location: Snetterton Circuit - Track Safety
Contact:

Post by Safety_James »

Good old freebies from Team Dynamics and the BTCC Honda Guys! :hurray:
インテグラ TYPE R 無限

Image

Post Reply