Bigpower

Finished painting the vent this morning and as the sun was shining :-D decided to have a go at fitting it. Removal of the passenger headlight was awkward as two of the bolts are tucked down out of hands reach so with a bit of fumbling around and the use of a large hammer and screwdriver they were off.





With the headlight removed there were a few bits of wiring that needed tidying out of the way so they wouldn,t obstruct the airflow to my filters.





The new vent fitted extremely well, no trimming necessary :-D The old wiring for the original headlight was unpluged and put out the way for ease of use when and if i need to refit it.





The new vent used the same bolt holes as the original headlight so was pretty easy to fit. The light in the new vent works on full beam with the original wiring plugging straight in





Just to finish off, i added my bigpower sticker from my membership pack. Total fitting time was around two and a half hours although i did stop to watch the F1 Racing

The new vent fitted extremely well, no trimming necessary :-D The old wiring for the original headlight was unpluged and put out the way for ease of use when and if i need to refit it.

Have you wired up the new light? I found the light sits too low on mine, only a bit but it bugs me and the light won't adjust high enough, but i'll fix that later.

Yes mate the light points a bit towards the ground but i can live with it.

i like those alot.. managed to come accross something similar for m 14a a while ago but could never actually come across a dealer to get one!!

James_s wrote:i like those alot.. managed to come accross something similar for m 14a a while ago but could never actually come across a dealer to get one!!

let me know if you do find one for the s14a please:-D

Kev, where did you wire the black and red wire that come out the back of the lamp??

Mr Windscreen wrote:Kev, where did you wire the black and red wire that come out the back of the lamp??

Hi fella i think you mean ian200sx as he has one and i just want one :-D

Red went to the red on the side light and the black went to the black on the side light as that

Rick at Drag and Drift can get something like this for you for the S14 i think. Give him a PM.

Darren that looks great, i bet it really makes a difference to the performance and the noise of the induction as well!!

323ian wrote:Rick at Drag and Drift can get something like this for you for the S14 i think. Give him a PM.

Darren that looks great, i bet it really makes a difference to the performance and the noise of the induction as well!!

nice one thanks ian will do :thumb: