Frayz's V7 Prodrive Edition Impreza STi - "The Bomber"

frayz · Post by **frayz** » Mon Sep 27, 2010 11:38 pm

Been quiet a few days now guys.

Basically i got 99% of the engine harness done. But i still wasnt quite happy with it so decided to tear it all back and start again. So i am now mid way through my 2nd time at doing it and im now really pleased with how its turning out.
I have made a small sub assembly harness up just for the cam/crank sensors, this i have finished.
It was much neater to do this and take the plug over the gearbox as it keeps everything around the turboside much much neater.

The main harness is now almost complete and ready for sleeving. I have done away with the stock harness gutter and its all looking much neater.

Im really liking the new look.

Post by **Stuart** » Tue Sep 28, 2010 5:48 pm

Up there with BigFil's for attention to detail. Thanks for the updates mate. Supreme patience and eye for detail.

My boredom would have crept in ages ago...........probably why I drive a twenty one year old Golf and you don't

frayz · Post by **frayz** » Tue Sep 28, 2010 5:55 pm

Thanks alot Stu. Im a fussy sod im afraid and it drives me to distraction if ive done something that im not really happy with. I do make some compromises as we all do with our projects, but what i do i try and do to the best of my ability.

Not bad for a home build by a grease monkey eh?

frayz · Post by **frayz** » Tue Sep 28, 2010 11:05 pm

Okay guys, i ran out of large heatshrink on the last few joins so i'll get some more of this tomorrow. Other than that the new harness is pretty much complete.

I laid it on just loose and so far it seems to fit good. I need to add P-clips and zip ties etc when it gets fitted for real. Admittedly im no expert loom builder or electrician but so far so good.

RX7 · Post by **RX7** » Wed Sep 29, 2010 5:20 am

That wiring loom is a work of art. When do you expect to have the engine back in mate ?

frayz · Post by **frayz** » Wed Sep 29, 2010 5:29 am

RX7 wrote:That wiring loom is a work of art. When do you expect to have the engine back in mate ?

Hopefully soon mate. I have a few other odds and ends to do and then I can drop the motor back in. Then its fuel system time.

Post by **Stuart** » Wed Sep 29, 2010 6:50 pm

More anal than Jenna Jameson

frayz · Post by **frayz** » Thu Sep 30, 2010 9:06 am

stuart wrote:More anal than Jenna Jameson

Im not quite sure ive seen said things. Maybe i'll take a closer look Stu

frayz · Post by **frayz** » Sat Oct 02, 2010 3:09 pm

Finished the harness off guys and started making up the breather pipework. I need to get a couple more fittings for the breather and then i can get the manifold finally bolted up. Then i can clip all the haness and pipework in place, then make up my fuel lines.

Also dummy fitted my filter to check how much i have to move the header tank.

Things are starting to look interesting

frayz · Post by **frayz** » Wed Oct 06, 2010 11:10 am

Knocked up a header tank relocation bracket. RCM inspired and fits quite nice.
Another item to be chucked in the powdercoat box haha.

Funds are slowing progress, but im doing what i can