Frayz's V7 Prodrive Edition Impreza STi - "The Bomber"

Show us yours....
User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

You should have been a surgeon mate !!!

Look how clean that enginebay is !!!
--------------------------------------------------------------------------------
Gareth

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Its filthy mate trust me... but it will be uber clean when its complete :D
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

nickhasl
Posts: 127
Joined: Mon Jul 14, 2008 7:40 pm
Location: cambs

Post by nickhasl »

think yours is bad fancy cleaning my engine then :D
ImageImageImage
some say he wears a baseball cap and drives a saxo and that he does 80mph in a 30mph but all's we no him as is the chav

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Little update as of tonight.

Havent done much what with WRC in the way but hoping to use the bank holiday weekend to good effect.

Heres the latest..

All intake gone, radpack out and downpipe ready to lift off.

Image

Image
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

After alot of work today, these are the fruits of my labour. Was a little tricky at times working completely alone but after some swearing and some cut knuckles the motor finally came out.

Not a hard job by any means but not the easiest without another set of hands.

Now the task of cleaning and preping everything to go back in before stripping the motor for parts and then on to the new build.

:D

Sorry for the cak fone pics but i wasnt about to get out the DSLR with dirty hands :D


Image
Image
Image
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

User avatar
duncan
Posts: 10897
Joined: Thu Jul 27, 2006 3:12 pm
Location: On the podium
Contact:

Post by duncan »

Wow - well done frayz. Not long now I suspect :thumb:

User avatar
Gerry H
Posts: 6967
Joined: Sun Sep 24, 2006 10:12 pm
Location: On the Road to Nowhere

Post by Gerry H »

I know what you mean by easy but a struggle. Took mine out on a sloping gravel drive in the peeing rain :roll: Never again :)

Lots of detail from now on please :D
Handle every stressful situation like a dog. If you can't eat it or hump it, piss on it and walk away!

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

Always fascinated with the Scoob engine, bit like my cars rotary one in
that it doesnt look at all like a 'normal' one.

Good work Frayz, gonna be a busy weekend for ya !!
--------------------------------------------------------------------------------
Gareth

User avatar
frayz
Posts: 1567
Joined: Tue Oct 24, 2006 11:23 am
Location: Frayz-Engineering HQ, Essex

Post by frayz »

Not that busy of a weekend. I promised the girlfrind that id do the motor out on Sat so i could spend Sun/Mon with her. I'll crack on a bit more next week :D
Frayz-Engineering Prodrive edition V7 STi
Built 2.5L, custom heads, GT35R, T-Logic, Tial, Fuelab, Injector Dynamics, GT-Spec, Exedy Compe R, Innovate, APS, KW, AP Racing, Whiteline, Noltec, Sparco, Speedline & S.R.E.

User avatar
cannit
Posts: 385
Joined: Mon Jan 01, 2007 10:32 pm
Location: Suffolk
Contact:

Post by cannit »

Impressive that matey, especially by yourself
EG6 SIR2

Post Reply