Mini Mayhem (Full valet)

Professional Valeting Services
Post Reply
User avatar
Stuart
Posts: 18080
Joined: Thu Jul 27, 2006 3:26 pm
Location: Auto-Genie HQ
Contact:

Mini Mayhem (Full valet)

Post by Stuart »

This belongs to the partner of one of my repeat customers. It was described as '......pretty clean, just needs a once over'!!!

I'll leave the pictures to show the before, during and after but essentially the bugs and tar needed to come off, the soft-top needed to become waterproof again, the scratches and etching needed to be removed and the metallic paint needed to look metallic again!!

The interior was absolutely honking! Glad I had some of my new uber posh stuff to make short work of the destruction that the owner and her kid had caused!!

Inspection shots
Image
Image
Image
Image
Image
Image
The usual deep clean routine starts with the wheels and I used three different products to get the brake dust, tar and road grime off. Here's the burnt on brake dust being worked out
Image
With the wheels, tyres and arches sorted, it was time to clean and protect that roof before things got worse!! I use a dedicated convertible roof cleaner and rinsed carefully, then allowed the heat to do its thing before masking up prior to protection
Image
I would usually prefer to use Euromask film for this but as I'd left my roll at APT so I had to resort to last years papers!!

With the roof done, it was time to get polishing. Test products and pads were trialled on the bonnet until I was happy with the results
ImageImage
With the metallic now prominent and bursting through once again, it was time to crack on to ensure I didn't overrun on my timeline

Image
Image
Image
The exterior trim, arches and mirrors are sounded with non painted plastic and that means faded grey everywhere! This all needed treatment so was dealt with using a product that gives around 3-4 months protection
Image
Image
Back on to that interior............
Image
Image
Image
Done!
Image
Image
http://www.auto-genie.co.uk
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing

User avatar
Ben
Posts: 11608
Joined: Thu Jul 27, 2006 8:16 pm
Location: East Anglia

Post by Ben »

How are you waxing in this heat?, I thought you can't wax in direct sunlight?.
Dum spiro, spero
____________________________________

User avatar
RX7
Posts: 5727
Joined: Fri Jul 28, 2006 11:16 am
Location: Norwich

Post by RX7 »

Yeah agreed, especially on a dark car !!

Very nice work mate. Like that a lot, the Minis look ace when the black arch trim is done.

What did you use on the wheels ? Ems are caked in brake dirt and dust and the stuff I have isnt really shifting them. Admittedly I havent taken the wheels off yet.
--------------------------------------------------------------------------------
Gareth

User avatar
Stuart
Posts: 18080
Joined: Thu Jul 27, 2006 3:26 pm
Location: Auto-Genie HQ
Contact:

Post by Stuart »

Ben wrote:How are you waxing in this heat?, I thought you can't wax in direct sunlight?.
Depends on the products you use and the techniques too :thumbs:
RX7 wrote:Yeah agreed, especially on a dark car !!
What did you use on the wheels ? Ems are caked in brake dirt and dust and the stuff I have isnt really shifting them. Admittedly I havent taken the wheels off yet.
If you go panel at a time and wait for hazing of the product whilst using the thinnest possible layer, it is possible (with the right products) to successfully polish and wax in direct sunlight on to hot panels. Obviously it's desirable to do it on cool panels and out of direct sunlight but as a mobile valeter I have to improvise :)

In terms of wheel cleaning Gareth on these alloys I used

AutoSmart Smartwheels at 1:20 with water on a wet wheel and rinsed after two minutes (out of sunlight)
then
AutoSmart Tardis neat to remove tar spots and then rinsed after two minutes
then
Car-Chem Revolt to remove iron build up which is caused by brake dust invariably. This was allowed to dwell for two minutes and then rinsed with lots of water. All chemicals were agitated with brushes and microfibre cloths.

If you don't follow the instruction above (sunlight, rinsing, ratios) you WILL wreck your alloys.

Hope that helps :thumbs:
http://www.auto-genie.co.uk
07733 527430
stuart@auto-genie.co.uk
Valeting, detailing and undersealing

User avatar
Daniel
Posts: 4260
Joined: Sun Oct 14, 2007 6:43 pm
Location: somewhere

Post by Daniel »

Triffik' :thumbs:

User avatar
mikeb
Posts: 926
Joined: Fri Oct 03, 2008 7:54 pm
Location: within motorsport

Post by mikeb »

Another cracking job mate :thumbs:
life rules

Post Reply