Bigpower

Most of the parts listed below have come off or were intended for my road legal drag car project.

http://bigpower.co.uk/phpBB3/viewtopic.php?f=62&t=20930

Most of the parts are either brand new/ test fitted only or refreshed.

Open to sensible offers on all the parts.

Seibon carbon doors – never used on car only test fitted - £1200 pair
Seibon carbon bootlid with polycarbonate rear screen - £500
Tech 2 carbon bonnet (rare) – some damage - £300
Reverie carbon seats with FD mounting frames/ seat pads - £1300 (seats are £1500 each new)
RE-A vented Type B headlights – not many of these about - £600......originally from Matt Wiltshire
Complete undertray incorporating front bumper back to rear of subframe – £150.....originally from Matt Wiltshire

Borg Warner S475 turbo kit
98mm rear wheel/ 1.10ar rear housing/ T6 flange – brand new never run, custom manifold with no wastegate runners, 5” to 4” downpipe, turbo mount and support. Some welding required to mount turbo support )- amazing workmanship and quality - £3000
RX7 PARTS intake manifold (not semi pp) – brand new never run - £450
M&W PRO DRAG 4R ignition system with 4 x MSD coils (4 channel) – hardly used - £1000
M&W single channel ignition system with M&W coil (twin output to run leading only) - £250
10+ Bosch injectors – 1600cc or 1680cc - not flowed tested - £60 each
Extreme rotaries side mount alternator bracket – test fitted only - £90
Extreme rotaries Gilmer drive kit, side mount alternator, electric water pump – test fitted only £100

C4 auto gearbox/tranny built by the best – Andy Frost UK – billet valve body, custom mods and parts/ 13b bell housing - £2000
B&M shifter - £100
Tony Dominello converter build to spec for 900hp 13b – 7000rpm stall with gas - £750
Starter for above - £50

2 x Jaz seats – used - £150
Assorted Autometer gauges - £varies
Modified REW intake with 4 x injector bosses in UIM/ LIM injector holes welded up. (Came off Grump 2 old 13b set up) - £75
Kirkey race seat - £75
HKS boost gauge ( up to 2 bar) - £50


Got quite a bit more stuff and parts, will be adding to the list once i know what exactly i am keeping and what i am not.

Some of the parts have already been sold.

The shell could possibly be for sale at the right price. Intention is to keep it and do something with it at a much later date.

PLEASE EMAIL ME TO INQUIRE ABOUT PARTS YOU ARE INTERESTED IN.

Thx

Revised list................

Seibon carbon doors – never used on car only test fitted - £1100 pair
Seibon carbon bootlid with polycarbonate rear screen - £500.........SOLD
Tech 2 carbon bonnet (rare) – some damage - £300.......SOLD
Reverie carbon seats with FD mounting frames/ seat pads -£1200 (seats are £1500 each new)
RE-A vented Type B headlights – not many of these about - £600......originally from Matt Wiltshire
Complete undertray incorporating front bumper back to rear of subframe – £150.....originally from Matt Wiltshire

Borg Warner S475 turbo kit
98mm rear wheel/ 1.10ar rear housing/ T6 flange – brand new never run, custom manifold with no wastegate runners, 5” to 4” downpipe, turbo mount and support. Some welding required to mount turbo support )- amazing workmanship and quality - £2750

RX7 PARTS intake manifold (not semi pp) – brand new never run - £450
M&W PRO DRAG 4R ignition system with 4 x MSD coils (4 channel) – hardly used - £1000
M&W single channel ignition system with M&W coil (twin output to run leading only) - £250
10+ Bosch injectors – 1600cc or 1680cc - not flowed tested - £60 each
Extreme rotaries side mount alternator bracket – test fitted only - £90........SOLD
Extreme rotaries Gilmer drive kit, side mount alternator, electric water pump – test fitted only £100

C4 auto gearbox/tranny built by the best – Andy Frost UK – billet valve body, custom mods and parts/ 13b bell housing - £1800
B&M shifter - £100
Tony Dominello converter build to spec for 900hp 13b – 7000rpm stall with gas - £750
Starter for above - £50

2 x Jaz seats – used - £150.....SOLD PENDING PAYMENT
Assorted Autometer gauges - £varies
Modified REW intake with 4 x injector bosses in UIM/ LIM injector holes welded up. (Came off Grump 2 old 13b set up) - £75
Kirkey race seat - £75
HKS boost gauge ( up to 2 bar) - £50
2 x carbon sill covers for FD, one set with slight damage to gel coat £70
BEE R 2 step power builder, brand new in bag, never fitted £140.........SOLD PENDING PAYMENT

Revised list -

ALL PARTS ARE PLUS POSTAGE AND PACKING BUT WOULD PREFER COLLECTION.................

PARTS ADDED

MOTEC M600 ECU, MOTEC ADL DASH (not backlit) - £1800 for both
Suspension travel sensor - £80


Seibon carbon doors – never used on car only test fitted - £1100 pair
Seibon carbon bootlid with polycarbonate rear screen - £500.........SOLD
Tech 2 carbon bonnet (rare) – some damage - £300.......SOLD
Reverie X C twin skin carbon seats with FD mounting frames/ seat pads -£1200 (seats are £1200 each new)
RE-A vented Type B headlights – not many of these about - £600......originally from Matt Wiltshire
Complete undertray incorporating front bumper back to rear of subframe – £150.....originally from Matt Wiltshire.....SOLD

Borg Warner S475 turbo kit
98mm rear wheel/ 1.10ar rear housing/ T6 flange – brand new never run, custom manifold with no wastegate runners, 5” to 4” downpipe, turbo mount and support. Some welding required to mount turbo support )- amazing workmanship and quality - £2750

RX7 PARTS intake manifold, E&j throttle body/ top hat (not semi pp) – brand new never run - £1000.......SOLD
M&W PRO DRAG 4R ignition system with 4 x MSD coils (4 channel) – hardly used - £1000
M&W single channel ignition system with M&W coil (twin output to run leading only) - £175
10+ Bosch injectors – 1600cc or 1680cc - not flowed tested - £60 each
Extreme rotaries side mount alternator bracket – test fitted only - £90........SOLD
Extreme rotaries Gilmer drive kit to go with side mount alternator, electric water pump – test fitted only £100

C4 auto gearbox/tranny built by the best – Andy Frost UK – billet valve body, custom mods and parts/ 13b bell housing - £1800
B&M shifter - £100
Tony Dominello converter build to spec for 900hp 13b – 7000rpm stall with gas - £750
Starter for above - £50

2 x Jaz seats – used - £150.....SOLD
Assorted Autometer gauges - £varies.....SOME SOLD
Modified REW intake with 4 x injector bosses in UIM/ LIM injector holes welded up. (Came off Grump 2 old 13b set up) - £75
Kirkey race seat - £75.....SOLD PENDING PAYMENT
HKS boost gauge ( up to 2 bar) - £50
2 x carbon sill covers for FD, one set with slight damage to gel coat £70
BEE R 2 step power builder, brand new in bag, never fitted £140.........SOLD PENDING PAYMENT